Digital Thermostat Temperature Control Module | Digital / Temperature Control Module

Instructions for use:

• Connect the power supply and equipment , the measuring temperature is displayed, press the "SET" button, press " + or - " to set the desired temperature (long press " + or - " to quickly increase or decrease), press "SET" to confirm the setting and return, controller Automatically performs the relay ON/OFF.
• The thermostat output is 10A relay, meet a variety of high-power loads,
• LED Indicator: LED off indicates the relay off; Lighting,indicates the relay is closed.
• Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected; "---" indicates high temperature alarm
• Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P6,then long press "SET" or 10 seconds without keystrokes to confirm the setting and return.

Buttons:

• P0: Cooling / Heating; Range: C/H; Default: C
• P1: Hysteresis Setting; Range:0.1-15; Default: 2
• P2: Highest Setting Limit; Range:110; Default: 110
• P3: Lowest setting Limit; Range:-50; Default: -50
• P4: Temperature Correction; Range:-7-7°C, Default: 0°C
• P5: Delay Start Time; Range:0-10 Minute; Default: 0
• P6: Key Tone Switch; Range:0-110; Default: Off
• When the Thermostat is power off, long press " - or + ", you can restore the factory settings

• Temperature range :-50~110°C
• Dimensions: 48.5x40mm
• Temperature control mode: ON / OFF
• Resolution: When temperature is 0.1°C, the resolution is -9.9~99.9, other temperature segment is 1°C
• Control accuracy: 0.1°C
• Hysteresis accuracy: 0.1°C
• Refresh rate: 0.5S
• High temperature protection: 0~110°C
• Supply voltage: DC 12V
• Static current: ≤35MA, attract current ≤65MA
• Output voltage: DC 12V
• Output power: 20A relay
• Measurement input: NTC (10K 0.5%) Waterproof Sensor
• Environmental requirements: -10 ~ 60°C, Humidity 20% -85%