Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
The Disrupter V-Alarm module is a vibration detection device that can be used in standalone mode (connect a siren for example) or connected to an existing security system. It has flexible configuration options and offers itself to various applications such as:
https://youtu.be/5X_Hhdz7B_I
10-16V DC input supply
A Non-Integrated RF receiver with trigger LOW (Ground) when remote is pressed (for remote control applications). Can be used with your current gate motor RF Receiver as long as it is not an onboard or integrated receiver. Or optionally, you could use a separate receiver. (Optional) TX transmitter with trigger LOW (Ground) to transmit to alarm (Sherlotronics S1 or similar suggested) (Optional) Alarm system (wired NC contact like alarm PIR sensor or beam).
When the V-ALARM module is used in standalone mode, it can be connected to a siren, alarm RF transmitter and \ or alarm system (through Relay NO/NC connection)
The RX_IN input can be connected to the gate motor Receiver. When a paired remote is pressed (causing the gate to open when the Receiver pulls LOW (to GND)), the V-ALARM will acknowledge authorized opening of the gate, and NOT trigger an alarm condition. The V-ALARM will ignore any alarm condition for 2 (two) minutes while the gate opens and closes. Pressing the paired remote again will restart the 2 (two) minute counter every time it is pressed.
V-ALARM Installer / User Manual
Disrupter V-Alarm Questions and Answers