Drill Bit Sharpening Attachment - TORMEK_DBS-22 1kg

With the Tormek patented attachment for drill bits DBS-22 you can now sharpen your drill bits with the highest precision.The optimal point and clearance angles can be set according to each drilling requirement, which depends upon the drill size and material.You can completely restore worn 192 as wellas broken 192 to a perfect shape.You create a 4-facet point which gives the ideal cutting performance since the chisel edge gets a point instead of being almost flat as on many 192.A 4-facet point will not walk and the thrust force required is considerably reduced compared to a conventional cone point drill.A precision sharpened 4-facet point generates less heat and the life of the drill is therefore also prolonged.Independent tests show that a Tormek sharpened drill lasts up to 4 times longer than a brand new conventional drill bit¹.By working with the laws of physics and cooling the edge continuously, the risk that the steel becomes overheated and loses its hardness or gets micro cracks is eliminated.You have full control all the time and can see how the sharpening proceeds.Flexibility and Precision4-Facet pointThe chisel edge comes to a point and will not walk. Bores a round, straight hole with close tolerances.Always equal cutting edgesThe two cutting edges are sharpened symmetrically and work in perfect unison which prolongs the life of the drill.Sharpens all point anglesIt can be set at any angle between90° and 150°.Always the right clearance angleThe optimal clearance angle canbe set according to each drilling requirement to 7°, 9°, 11°or 14°.Sharpens all drill sizesOne and the same drill holder copes with 192 from 3 mm (1/8") to 22 mm (7/8"). No change of chuck required.