MJX Bugs 3Pro fly more combo with 2 batteries
When you buy a drone from us you get technical support, advice & outstanding customer service.
We have stock in Johannesburg and courier overnight to most towns in RSA.
The Bugs 3 Pro is a well made, powerful, brushless motor, GPS enabled camera quadcopter.
Brushless motors are more efficient, last longer and can carry heavier loads.
The B3Pro is able to carry a Gopro which fits into the included camera bracket.
The B3Pro comes complete with the top of the range MJX C6000 full HD camera.
It is ideal for estate agents, carrying out roof inspections, filming of events or just having fun.
FEATURES:
GPS/ Glonass enabled.
Brushless motors with ESC over current and over temperature protection.
One key take off and land.
Point of interest (circle me).
Follow me.
GPS Waypoint set and follow.
Max. flight time is around 22 minutes.
Altitude hold.
First person (FPV) uses 5G wifi and has a maximum range of around 500m under ideal conditions.
The Bugs 3 pro comes with the full HD C6000 camera.
The camera gimbal can hold most types of action camera.
Control range is stated as 600 to 800m by manufacturer (but flight reviews on the internet are achieving in excess of 1000m).
Headless mode at the flick of a switch.
Bugs 3 Pro has three autonomous flight protocols:
Smart Return To Home
When the dedicated RTH button is pressed and the drone is connected to at least 7 satellites, the drone will automatically return to takeoff location.
You can still control your drone while it’s coming back to you in order to avoid any potential obstacles that might come in its way.
If you change your mind, you can always press RTH button again and the drone will exit RTH mode.
Failsafe Return To Home
If the drone loses transmitter connection for more than 6 seconds it will automatically turn on its failsafe protocol.
Once the connection has been restored, you can press the RTH button to take over full manual control.
Low voltage Return To Home
If your drone’s battery goes down to critical levels, low voltage return to home function will turn on.
This will guarantee your drone returns safely to its takeoff location.
There will also be a series of short beeps notifying you that your drone is running low on battery.
Transmitter screen information:
RSSI – transmitter/receiver signal reception.
GPS – The number of obtained GPS satellite connections.
Distance – The distance between the transmitter and drone expressed in meters.
Altitude – The altitude between the takeoff and current drone’s position.
RxBat – Current drone battery level.
TxBat – Current transmitter battery level.
Headless – Headless mode on/off.
RTH – RHT mode on/off.
Calibration – Nofitying whether or not the compass calibration is ongoing.
In the box:
Bugs 3Pro
Batteries X2
Camera (C6000)
Transmitter
USB Charger
Spare propeller set
Propeller tool
Gimbal
Screwdriver
Balance charger
English Manual
Camera Cable
Important:
Your phone must be 5 gigahertz wifi enabled to use the special features like FPV, follow me, circle me and waypoint flying.
