Dylon Fabric Dye for hand use

For Clothes and Fabric

50 Grams 

DYLON 50g Hand Dye, 24 Colours.

Welcome to the colourful world of DYLON.

You’ll find all colours bright and beautiful here, from rich and intense to pale and mysterious, DYLON gives you a rainbow of colours to choose from. So whether you pick a Sunflower Yellow or plunge for Ocean Blue, inspiration is at your fingertips.

With DYLON fabric dyes you can wake up your wardrobe, revive faded clothes or spice up a room with a touch of colour. Making a change with colour has never been so easy! A whole spectrum of colourful possibilities await
you…

Each 50g pack will dye 250g of dry fabric to the intense colour indicated on the packet.

OR

If you prefer, it will dye a larger weight of dry fabric to a lighter shade.

See the "How to" video on this link - http://www.youtube.com/embed/hKG8X32voJ4?rel=0

DYLON Hand Dye Instructions

1. Weigh dry fabric. Wash thoroughly. Leave damp

2. Using rubber gloves, dissolve dye in 500ml warm water

3. Fill bowl/stainless steel sink with approx. 6 litres warm water (40°C)

4. Stir in 250g (5tbsp) salt. Add dye & stir well

5. Submerge fabric in water

6. Stir for 15mins, then stir regularly for 45mins

7. Rinse fabric in cold water. Wash in warm water and dry away from direct heat & sunlight

HELPFUL HINTS

• You will need 250g salt

• 1 pack dyes up to 250g fabric (e.g. shirt) to full shade or larger amounts to lighter shade

• Suitable fabrics: Cotton, linen and viscose. Wool, Silk, Polyester/cotton and polyester/viscose mixes will dye to lighter shade

• Not suitable: Pure polyester, acrylic, nylon & fabric with special finishes

• Wash separately for first few washes to remove any excess dye

• Please note: Colour mixing rules apply (e.g. blue on red gives purple)

MICROWAVE DYING

• Hand dye can be used in the microwave to create special effects.

• For cotton, linen, silk and polyester/cotton mixes only.

• Micro-Dyeing is not suitable for wool, viscose or synthetic fabrics.

• DO NOT USE ON VISCOSE, AS FABRIC CAN GIVE OFF HARMFUL FUMES.

• Remove all metal on fabric (zips, studs, etc).

How To Use

1. Wash the fabric and leave damp.

2. Select your special effect and prepare the fabric by scrunching, knotting, twisting or folding – tie all fabrics tightly.

3. Wearing rubber gloves, empty the dye carefully into the bowl and gradually add 250 ml / ½ pint of hot water. Stir thoroughly to ensure dye is dissolved. Add further 250 ml / ½ pint of water.

4. Place the fabric in the bowl and work into the dye.

5. Put the bowl into a plastic bag or plastic wrap and place in the microwave. Set on ‘high’ for 4 minutes.

6. After 4 minutes remove the bowl from the oven – remember to protect your hands from the heat.

7. Tip away the dye solution and rinse the fabric in cold water. To protect the pattern do not undo any knots, twists, folds etc., until the water runs clear.

8. Rinse, wash and dry as for the Hand method.