E-Image J100S+GA752+EI-7004 Kit Carbon Fiber Jib Arm with Aluminum Tripod Legs Medium Dolly
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product details
With this E-Image J100 Jib with Tripod and Dolly kit, you can accomplish smooth complex camera movements. The E-Image J100 jib can support payloads from 8 to 15 pounds, perfect for a small camera rig atop a 75mm fluid head. It has real-time adjustment of tilt and a flexible parallax adjustment. Using the included GA752 tripod legs and 7004C dolly, also from E-Image, the jib can be trucked in tandem with jib movement across even flooring or locked down for classic crane shots. Having the dolly is convenient for moving the jib between shots as well. Carrying cases for the jib and tripod are included, as are three 5.5 pound weights for balancing the jib. See below for more information on the individual items included with this product.
The Parallax Control Fluid Drag Jib Kit from E-Image features a standard payload of 8 lb, and maximum payload of 15 lb when the weight is properly balanced and calibrated. It has a minimum extension of 30.75", and a maximum extension of 48.5" from the fulcrum. You can easily adjust the tilt angle from the base of the jib with mechanical tilt controls and tilt measurement marks located at the resistance cuff. You can change the camera's point of focus by adjusting the parallax settings at the base of the tilt arm.
With a maximum height of over five feet and a minimum height of just over two feet, this set of 2-Stage Aluminum Tripod Legs with 75mm Bowl from E-Image provides a stable platform for your 75mm fluid head and features a two-stage / three-section design. The aluminum legs incorporate E-Image's Mono-Lock design that allows you to adjust the leg height using the one locking lever at the top of the each legs.
The legs support up to 88 pounds of head, camera, and accessories, while extending to over five feet in height, with a minimum height of just over two feet. The aluminum alloy construction provides you with a balance of strength and durability and is a lower cost option to carbon fiber legs. The legs feature a removable, adjustable, mid-level spreader that allows you to set up the legs on uneven surfaces. The legs also incorporate spiked feet for increased grip on soft surfaces, and the included spike covers allow you to use the legs on hard/slippery surfaces. An integrated leg wrap/safety extends from the bottom of one leg and wraps around the legs when closed, keeping the legs together during transport or storage.
The Universal Middleweight Tripod Dolly with Locking Wheels from E-Image supports dual-spiked tripod feet and tripods with rounded rubber feet, and it holds up to 132 lb, allowing you to attach heavy-duty tripods.
To secure spiked feet, the Universal Middleweight Tripod Dolly uses rubber tabs near each wheel. For rubber feet, it offers a universal sliding mount on each leg of the dolly. These mounts work as clamps that the tripod feet secure into. With the tripod foot gripped, a knob on the side tightens the grip securely. Examples of supported rubber feet include those of the E-Image 760AT and GA230 tripods. Each of the sliding mounts can also be moved anywhere along the length of the dolly leg and tightened into a desired position via another knob.
The Universal Middleweight Tripod Dolly also has individually locking wheels, an integrated handle for easy transport, and a simple, single arm lock.