Brand New
For PETROL Cars
Fuel saving of upto 15%
LOCAL STOCK
R229 each
Countrywide Postage.
EcoOBD2 : Lower Fuel and Lower Emission
EcoOBD2 is a Plug & Drive Ready device the function of which is to reduce fuel consumption and lower emissions.
EcoOBD2 is easy to install, just plug it into the OBD2 connector of cars.
EcoOBD2 fits all car from the year of 1996.
It works on OBD2 protocols by remapping the Car's computer ECU. After driving 200 km ecoOBD2 adjusts itself to the car according to the drivers habits and always keeps remapping the ECU to save fuel and lower emissions.
What is EcoOBD2 Chip Tuning Box?
When it plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car.
EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
EcoOBD2 discovers the the hidden power of your car.
EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.
Up to 15% fuel savings
Ease of use:
Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
EcoOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment.
EcoOBD2 works on the basis of changing the signal from ECU. As a consequence, it changes the whole injection map.
The main difference between EcoOBD2 Chip Tuning Box and Remapping tuning methods is that EcoOBD2 is easily removable, and after unplug you go back to the factory settings.
EcoOBD2 is the cheap and safe type of tuning. Remapping is a permanent change to your car.
This is the expensive tuning and you cannot remove it.
EcoOBD2 is equipped with the engine protection function and 100% safe for your car engine.
EcoOBD2 is produced on a printed circuit board in SMD technology. EcoOBD2 Chip Tuning Boxes are high quality.
Installation and Calibration:
1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
5 - Start up the engine.
EcoOBD2 Petrol : Green
Certificates : CE / FCC / RoHS
Package content:
- EcoOBD2 Chip Tuning Box Interface
- User Manuel English
