| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
1. Solar Module Power: 20Wﾡ 5% Dimensions: 420x280x2.5mm DC output: 12V/1.5A USB output: 5V/1.7A Weight: 0.7kg Type: Monocrystalline Solar Module Material: Aluminum base Output accessories: DC cable + DC crocodile clip
2. 300W Power Inverter Input voltage: DC 10.5V~15V, (The inverter activates low voltage protection when the battery voltage drops below 10.5V, and high voltage protection when it exceeds 15V.)
This inverter produces a modified sine wave and is unsuitable for appliances that operate with a built-in motor, such as hair dryers, air conditioning units, coffee makers, water pumps, induction cookers, refrigerators, and microwave ovens. Ensure that the combined rated power of all connected devices does not exceed 300W.
Output voltage: AC 220V/110V. Output frequency: 50Hz/60Hz. Peak power: 300W. Rated power: 300W (Ensure that the combined rated power of connected devices does not exceed 300W). Output waveform: Modified sine wave. Inverter dimensions: 205x117x58mm.
3.12V 24V Automatic Solar Charge Controller PWM featuring an LCD display and dual USB ports. Charge current capacity is 100A. Dimensions of the product are 148.5x78x35mm. It supports DC 12V / 24V with automatic intelligent conversion. The display is an LCD digital type. It has dual USB charging ports with 5V 2.1A output. The operating temperature range is from -35 to +60 degrees Celsius.
Contents of the package include: 1 solar panel, 1 power inverter, 1 solar charge controller, 2 battery clips, 1 cigarette lighter plug, and 1 user manual.
[LED Green&Red Work Lights] When the inverter is functioning properly, the green LED lights indicate that it is operating well. However, if it enters a protection mode due to issues like low voltage, high voltage, overheating, or overload, the red LED lights will illuminate. In this case, you must turn off the inverter, identify which protection feature has been triggered, and address the issue before the inverter can resume normal operation.
The LED battery display indicates the charge level of the battery, alerting you when the power is low. Once the battery is linked to the inverter, the LED screen activates and displays the current battery capacity. It features a five-level battery bar, with each level corresponding to 20% of the total power. If the battery runs out of power, the display will blink to notify you that it's time to recharge.
The device features one AC outlet and two USB ports that provide rapid charging for mobile phones, computers, laptops, breast pumps, nebulizers, razors, medical rescue devices, emergency equipment, and more, serving as an emergency power source.
The car power converter features built-in fuses, a safe charging design, and a cooling fan to prevent overheating, conserve energy, and protect against over-voltage, overload, over-current, short circuits, under-voltage, and overheating.
This design is both lightweight and high-quality, making it perfect for travel, camping, and business trips. It can connect to nearly any vehicle with a 12V power outlet, allowing for charging on the go.
How do I determine the appropriate size for a power inverter? The selection is based on the wattage or amperage of the devices you intend to operate (check the power usage on the specification label of the appliance or tool). It is advisable to opt for a model that exceeds your estimated requirements by at least 10% to 20% more than your highest demand.
Model DC 12V To AC 220V (EU)
