Features:
- It is simple to use and professional It is safe and easy to be used
- Suitable for professional nail Art Salon or personal use
- Please clean the body with a soft cloth, never use cleaning solvent or detergents
- Lightweight design for precision Operation
- Variable speed from 3,000-18, 000RPM
- Accepts all rotary accessories
Operation:
- This tool is design for carver, engrave, rout, grind, and sharpen, sand, polish, drill, and more.
- Unplug the tool from the electrical outlet before loading a bit.
- Press the shaft lock button, rotate the collet nut anticlockwise (but do not take the nut out) insert the bit, and tighten the collet clockwise securely.
- But avoid excess tightening of the collet nut in case of damage in the nut.
- Slide the on/off switch to find the speed needed between 3000-13,000RPM. Slide the switch to the black dot for a complete stop.
- When finished, unplug the tool, take the bit out and store the set in a dry place.
Safety Rules:
- Always unplug the tool when you change accessory/collet or finish using the machine.
- Do not engage the shaft lock button while the tool is running.
- Never use a damaged bit.
- The machine is not waterproof. Please keep away from water. If the machine falls into water, unplug it immediately and do not touch the water.
- Do not touch the bit or collet after using it because the bit and collet are too hot to be touched by bare hands.
- Keep dust out of your eyes and lungs by using protective eyewear or a dust mask.
- When not used, tools must be stored in a dry place and kept beyond the reach of children.
Specifications:
- Voltage: 100-240V, 50Hz
- Power: 5-10W
- Power Cable: 1M long
- RPM: 3,000-18000
- Material: Premium ABS
