| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Specially designed for Ender 3 / 3X / 3 Pro, Ender 5, CR-20 with the hotbed plate size of 235*235mm.
The A plate is flexible and magnetic, it is easy to move away from the build platform and take away prints.
Can be printed on the heated bed directly without glue. Print without a warped edge.
Attention!!! Long-time high-temperature heating could cause it degaussing. Please don't print PETG on it.
If you want to use another building plate, please tear off Part B of this magnetic sticker firstly, then put another plate directly on the metal hotbed plate to printer. If you put another plate on Part B of this magnetic sticker, the may cause the magnetic sticker melted on the hotbed and can't be torn off anymore
NOTE: This product is rated for use with PLA filaments ONLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will NOT prevent prints from warping.
NOTE: This product is not for use with high-temperature printing applications above 70*C.
Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you're ready for the next round of printing.
The product includes two parts: Part A + Part B
Part A: The top is a matte surface (the same as other stickers), and the back is magnetic (the interaction with the front of Part B )
Part B: The top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform for fixing)
Pay Attention:
* Please level the build plate well before printing.
* Please do not let heated nozzle touch the A plate directly!
