| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
SELECTED OPTION:
SIZE: #1
Feature:
1. Lasting vacuum, space saving, moisture and mildew proof .
2. Manual air pump, human body mechanics design, easier air extraction .
3. Professional leak proof air valve, which can be extracted by unscrewing , contains leak proof soft plug, prevents air from reverse flow, and has good sealing effect .
Specification:
Size?¯??Optional) | # 1 : About 50 * 60cm / 19.6 * 23.6 # 2 : About 50 * 70cm / 19.6 * 27.5 # 3 : (Hand Pump Length) About 24cm / 9.4 |
Material | PA / PE |
Color | Transparent |
Compressed Objects | Quilts / Clothes / Plush Toys , Etc |
Instruction:
1. Open the bag, arrange the quilt or clothing and put it in .
2. Seal the bag mouth with two-thirds with a slide, leaving a third, and open the mouth at 1/3 .
3. Press the quilt or clothing a few times to allow most of the air to be discharged from the mouth at 1/3 (friends who use air pumps must pay attention, this can save a lot of energy) .
4. Quickly pull up the remaining 1/3 of the entrance .
5. Use a slide to slide back and forth at the seal to ensure that the bag is truly closed .
6. Pull out the dust cover on the bag, loosen the suction valve in the direction of ON, and align the mouth of the vacuum cleaner or the pump with the valve to start aspirate. (People with hand pumps note that because the large bag takes a long time to pump, it is not necessary to pump it all at once. You can stop in the middle and tighten the exhaust valve to the OFF direction, so that the air will not enter. After waiting for the rest to forget, unscrew the cut gate and continue to pump.) .
7. After the pumping is completed, tighten the pumping valve and close the dust cover to complete the whole process .
?
Note:
1. Clothes and quilts, etc., should be completely dry before being put in the bag .
2. Please do not touch directly with nails or needles to avoid puncturing the bag .
3. Please avoid using items with feathers in the bag because there will be some hard thorns. When the air is exhausted, the thorns may protrude from the items to puncture the bag .
4. The zipper may be deformed if the dome is curved. This will reduce the sealing performance, so try to smooth the bag. Small fibers or dust attached to the zipper will also reduce the tightness, so use a damp cloth to clean the zipper before pulling it on .
5. The sealing rubber plug cannot be pulled out. Pulling out the rubber plug will inject air .
6. The outstanding feature of the bag is that it does not leak out without scratching. If you accidentally scrape it and your mouth is not too big, just use double-sided tape to stick the two sides together .
7. Please don`t screw off the valve. Just loosen it. There is a circular gasket in it. Please don`t take it off !!!
