Fan Speed Controller 12V PWM Temperature Module LOCAL STOCK

Name: Fan Speed Controller 12V PWM Temperature Module **LOCAL STOCK**
SKU: CNT367
Price: 89.00 ZAR
Availability: InStock

New

Add to watch list

Add to cart

Shipping

Standard courier shipping from R60

R60 Standard shipping applies to orders under R100, in most areas in South Africa. R30 Standard shipping applies to orders over R100. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate

Free collection from Vasco Estate, Cape Town

The seller allows collection for this item and will be in contact with the full collection address once the order is ready. Ready for collection by Tuesday, 28 May.

Ready to ship in

The seller has indicated that they will usually have this item ready to ship within 2 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Get it now, pay later

Seller

Diy Select - Cape Town7284

100.00% Positive ratings

Buyer Protection

How you're covered

Product details

Condition

New

Location

South Africa

Product code

CNT367

Bob Shop ID

615214651

Controller PWM Fan Speed Temperature 12V:

Specifications:

Working Voltage: 12V DC
Circuit Load Capacity: maximum current per output 4A
Temperature Range: 35 Deg C to 90 Deg C
Fan Speed Range: 20-100% PWM Speed
Size: 50 x 43mm

Here is a link explaining this unit: https://www.electroschematics.com/fan-speed-controller

There are 5 Buttons to set your fan speed according to Temperature:

TFL = 1, TP1 = 2, TP2 = 3, BF1 = 4, BF2 = 5

(TFL) 20% or 40% Minimum Fan Speed Setting:

A) If TFL is off, minimum PWM fan speed is 20% and maximum PWM fan speed is 100%
B) If TFL is on, minimum PWM fan speed is 40% and maximum PWM fan speed is 100%

(TP1 & TP2) Temperature Zones and Fan Speeds:

A) If TP1 is off, and TP2 is off: If temperature is less than 35deg C, fan will run at minimum speed (20% or 40% Settable) and if Temperature is more than 45 deg C, fan will run at 100% speed

B) If TP1 is on, and TP2 is off: If temperature is less than 40deg C, fan will run at minimum speed (20% or 40% Settable) and if Temperature is more than 55 deg C, fan will run at 100% speed

C) If TP1 is off, and TP2 is on: If temperature is less than 50deg C, fan will run at minimum speed (20% or 40% Settable) and if Temperature is more than 70deg C, fan will run at 100% speed

D) If TP1 is on, and TP2 is on: If temperature is less than 60deg C, fan will run at minimum speed (20% or 40% Settable) and if Temperature is more than 90 deg C, fan will run at 100% speed

(BF1 & BF2) Buzzer Alarm Setting:

A) Fan 1: If BF1 is on, and fan stops, alarm will sound / If BF1 is off, and fan stops, alarm will not sound
B) Fan 2: If BF2 is on, and fan stops, alarm will sound / If BF2 is off, and fan stops, alarm will not sound
If BF1 and BF2 both are on, (FAN1 and FAN2) any one or both stops, the alarm will sound

*Above range only for PWM range, the actual control effect will vary depending on the fan. Numerous fans can be connected to a single fan output (not exceeding total of 4 Amp)