FC - 30.5x30.5mm H743 SLIM V3 2-8S Flight Controller ICM42688P with 5V BEC Output for RC FPV Racing

Feature:
Newest H743-SLIM V3 2-8S Flight Controller For RC FPV Drone H743 BetaFlight Slim Compact High Performance.

1. Compact Design:
The slim and compact design of the H743-SLIM V3 makes it easy to install and handle, enhancing your flying experience.

2. High Performance:
Experience superior flight with the H743-SLIM V3 2-8S Flight Controller, designed for optimal performance in RC FPV drones.
3. Easy Assembly:
The H743-SLIM V3 comes unassembled, allowing for easy customization and personalization to suit your needs.
4. Durabl Material:
Crafted from composite material, this flight controller ensures durability and longevity, standing up to rigorous use.

Specifications:

Model: H743 SLIM V3

MCU: STM32H743VIH6,480MHz,1MB RAM,2MB Flash
ICM: 42688P
Baro: Infineon DPS368 (I2C2)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card socket (SDIO)
7*Uarts (1,2,3,4,6,7,8) with built-in inversion
13*PWM outputs (including 'LED' pad)
2*I2C
1*CAN
6*ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
3*LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Red)
1x SPI3 breakou
USB Type-C (USB2.0)
1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
Dual Camera Inputs switch
5V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART

Power:
Vbat Input: 6~36V (2~8S LiPo)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
No Current Sensor built-in
ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot

Firmware
ArduPilot (ChiBiOS): MATEKH743
BetaFlight: MATEKH743
INAV: MATEKH743

Physical
Mounting: 30.5 x 30.5mm, 4mm with Grommets @3mm
Dimensions: 36 x 36 x 5 mm
Weight: 7g

Package Included:
1 x H743-SLIM FC
5 x Silicon grommets M4 to M3
1 x JST-SH1.0_8pin cable, 5cm
1 x JST-SH1.0_8pin connectors
1 x JST-GH-4P to JST-GH-4P cable for CAN port, 20cm