FlySky FS-RM003 Transmitter Module Compatible AFHDS 2A For FS-TH9X Transmitter

FlySky FS-RM003 Transmitter Module Compatible AFHDS 2A For FS-TH9X Transmitter

OVERVIEW:

The 2. 4GHz Automatic Frequency Hopping Digital System Second Generation adopted by FS-RM003 can effectively prevent external interference, has the function of failsafe protection, and compatible with the standard R slot transmitters available on the market.

Description:
Brand Name: FlySky
Item Name:?FS-RM003 Transmitter Module

Model: FS-RM003

Dimensions: 178 * 52 * 40mm

Weight: 41g

Built for: TH9X

Wireless frequency: 2.4GHz

Transmission power: <20dBm

Wireless protocol: AFHDS 2A

Range:> 800m (air)

Latency: <15ms

Antenna type: external single antenna

Power: 4.5V-18V

Data port: PPM

Temperature range: -10 a?? a?? + 60 a??

Humidity range: 20% -95%

Online update: Yes

Certification: FCC ID: N4ZFRM00300

Compatible Protocol: FlySky?AFHDS 2A

Features:

Second generation automatic frequency hopping digital system Supports AFHDS 2A receivers Can be installed in the FS-TH9X Can switch output modes

BIND Method:

The RF module allows two binding methods. During binding, please install and connect the 2.4G RF module first, and then access the binding state for binding. Method 1: - Please connect the PPM interface first, press and hold the BIND key of RF module and turn on the power supply at the same time. The LED indicator flashes quickly, the device enters the binding state; The LED indicator is always on, the binding is successful. Method 2: - When the RF module does not receive the feedback from the receiver, the LED indicator flashes slowly, the binding key is pressed 3 times quickly (within 2S)to re-enter into the binding state.
Note: The user can choose one of the binding methods according to the actual situation. If the binding fails, please repeat the binding steps of Method 1 or Method 2.
Compatibility: - The FS-RM003 V2 module is compatible with the PL18/NV14/FS-TH9X along with various other Radios when using PPM output. - The FS-RM003 V2 module is compatible with all AFHDS 2A receivers such as the FS-X14S/FS-iA8X/FS-X8B/FS-X6B/FS-A6/FS-iA6/FS-A3/FS-iA6B/FS-iA4B/FS-iA10B.etc.
Failsafe: This function protects the user by preventing the model from behaving unexpectedly if signal is lost. - After the RF module is powered on, binding successfully and enters into the normal state, press the BIND key for 3S until the indicator light flashes to trigger the fail-safe protection setting. The RF module saves the current channel value as the fail- safe protection value and sends it to the receiver, and the fail-safe protection is set successfully.
Package Included:
1 x FS-RM003 Transmitter Module

?
, ,