For Bafang Bbs01 Bbs02 Front and Rear Lights, Support Horn/turning

Application: for Bafang Mid-drive Motor BBS01 BBS02 BBS03/HDDriving lights: When the switch of driving lights is turned on, the headlights and tail lights are onHorn: When the horn button is pressed, the horn starts to work, release it to cancelBrake light: When the brake signal line and the controller brake low voltage signal are connected normally, the brake light will light up while braking, and the brake light will go out when the brake is cancelledTurn signal: When the turn switch of the designated direction is toggled, the turn signal of the corresponding direction starts to work and flashes, the flashing frequency is about 800ms each timeHeadlight:1. Applicable voltage range: 6V2. Power: 59mA/2.8W3. Luminous flux: 180-220LM4. Horn Power: 44mA/2.1W5. Horn Volume: 80-100dB6. Product size: 62x50x70mm7. Cable length: about 1.5MTail Light:1. Applicable voltage range: 12-80V2. Power: 1.5W3. Number of light sources: 144. Luminous flux: 15LM5. Product size: 132x65x40mm6. Cable length: about 1.5MSwitch:1. Product size: 26x53x61mm2. Cable length: about 1.5Mcolour: blackMaterial: plasticPackage Contents:1 x Front Light with built-in horn1 x Switch (horn/ front+Rear light switch/turning light switch)1 x Rear Light (include turning light/brake light)1 x Waterproof Quick release harness (connect between Bafang Controller and 1 to 4 E-bus harness)Only the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.