Vehicle Fitment & Part Details
This front-left inner CV joint is listed for Nissan Maxima and selected Nissan Sentra applications. Supplied specifications are 27 outer splines, 25 inner splines, 39 mm seal size, 89 mm outer diameter and 184.5 mm overall length. Confirm compatibility by matching the removed unit and listed fitment details before ordering. Verify VIN/engine.
Key Details
- SKU
- NI6425
- Component
- Inner CV Joint
- Position
- Front Left
- Primary Fitment
- Nissan Maxima MK III 3.0 (1988-1994)
- Specs
- 27 outer splines; 25 inner splines; 39 mm seal size; 89 mm outer diameter; 184.5 mm length; ABS: N/A; groove position: N/A
Listing Highlights
- Front-left inner CV joint for selected Nissan Maxima and Sentra applications.
- 27 outer splines and 25 inner splines with a 39 mm seal size.
- 89 mm outer diameter and 184.5 mm overall length.
Product Specifications
| Specification | Value |
|---|
| Fitting Position | Front Left |
|---|
| Outer Spline | 27 |
|---|
| Inner Spline | 25 |
|---|
| Seal Size | 39 mm |
|---|
| Outer Diameter | 89 mm |
|---|
| ABS | N/A |
|---|
| Groove Position | N/A |
|---|
| Length | 184.5 mm |
|---|
Vehicle Fitment
This inner CV joint is listed for 8 Nissan applications covering Maxima MK III, MK IV, MK V and MK VI as well as a non-USA Sentra application. Supplied year coverage runs from 1988 to 2008. Use the full table below to confirm model, generation, year range, engine, power and transmission before ordering.
| Model | Chassis | Years | Engine | Power | Transmission |
|---|
| Maxima | MK III | 1988-1994 | 3.0 (VG30E) | 125 kW | Automatic 4 speed / Manual 5 speed |
|---|
| Maxima | MK III | 1988-1994 | 3.0 (VG30E) | 128 kW | Automatic 4 speed |
|---|
| Maxima | MK IV | 1994-1999 | 3.0 (VG30DE) | 142 kW | Manual 5 speed |
|---|
| Maxima | MK IV | 1994-1999 | 3.0 (VQ30DE) | 157 kW | Automatic 4 speed |
|---|
| Maxima | MK IV | 1994-1999 | 3.0 (VQ30DE) | 142 kW | Automatic 4 speed / Manual 5 speed |
|---|
| Maxima | MK V | 2000-2003 | 3.0 (VQ30DE) | 147 kW | Automatic 4 speed / Manual 5 speed |
|---|
| Maxima | MK VI | 2003-2008 | 3.0 (VG30DE) | 147 kW | Automatic 5 speed / Manual 6 speed |
|---|
| Sentra | | 2000-2006 | 1.8 (QG18DE) | 96 kW | Automatic 4 speed / Manual 5 speed |
|---|
Fitment Notes
- Always match vehicle details and the removed CV joint measurements before ordering. Verify VIN/engine.
Important: With CV joints and driveshafts, a VIN check can still return multiple possible variants within the same model range. First confirm whether you need an inner CV joint, outer CV joint, CV boot, or complete driveshaft. Then match the removed unit by outer spline count, inner spline count, seal size (mm), outer diameter (mm), groove position, overall length (mm), and ABS ring tooth count where applicable. The only reliable way to confirm the correct part is to physically inspect and measure the old unit and match these specifications before ordering.
Returns Notice: CV joints, driveshafts, and boots that are greasy or incomplete are not returnable.
Compatibility Verification Notes
- Confirm the required position is front left and that an inner CV joint is required.
- Match 27 outer splines, 25 inner splines, 39 mm seal size, 89 mm outer diameter and 184.5 mm length to the removed unit.
- Confirm the listed vehicle generation, year, engine and transmission before ordering.
- Fitment data may vary by production date, market, import history and drivetrain specification.
Common Questions
Will NI6425 fit my Nissan Maxima?
NI6425 is listed for the Nissan Maxima applications shown on this page. Confirm the exact generation, year, engine, transmission and CV joint measurements before ordering.
What measurements should I compare?
Match 27 outer splines, 25 inner splines, 39 mm seal size, 89 mm outer diameter and 184.5 mm overall length to the removed joint.
Which position is this CV joint for?
This listing is for a front-left inner CV joint.
