FRP Membrane Housing

New

2 available

Indicative market price: R4,750.00

Only 2 left – grab it before it’s gone!

R2,400.00

49% off

Want to pay less?

Shipping

R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate

The seller allows collection for this item. Buyers will receive the collection address and time once the order is ready.

The seller has indicated that they will usually have this item ready to ship within 3 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Seller

Bargain Place264

94.29 % Positive ratings

Get it now, pay later

Condition

New

Location

South Africa

Bob Shop ID

649159534

4040 FRP Membrane Housing - End Port Standard Fibreglass Reinforced Plastic (FRP) Membrane housing is typically used with commercial or small industrial Reverse Osmosis, Nanofiltration (NF or Nano), and Ultrafiltration (UF) Systems. This Housing is compatible with 4040 Size membranes. Housing Specifications Commercial Stainless Steel 4" x 40" Membrane Pressure Vessel Housing Max Working pressure: 300 psi Feed/concentrate Connection: 3/4" Feed and Drain Ports (FNPT)1/2" Permeate Ports (FNPT) Fibreglass Reinforced Plastic (FRP) construction Double O-ring End Port Caps Included Clamps, Included Brackets Included PVC Threaded and Glue Fittings PVC(Polyvinyl chloride) fittings are used to connect sections of pipes or tubes, adapt to different sizes or shapes, and controlling the flow of water. There are two predominant types of PVC fittings namely PVC Glue Fittings and PVC Threaded Fittings. The difference between the two is that PVC Glue Fittings result in permanent joints and PVC Threaded Fittings are semi-permanent and can be replaced. PVC Glue fittings are joined with primer and cement- a chemical solvent that melts the surface of the PVC and then quickly re-hardens to fuse the pieces together. This results in an airtight, leak-proof bond similar to what you get with welding metal. An example of such a fitting is a PVC Glue Reducing Socket which is used to join together two pieces of PVC pipes with different diameters. Another example would be a 90 Degree Elbow which is used to connect two pipes of the same diameter at an angle of 90 degrees.PVC Threaded fittings utilise a simple threaded connection whereby replaceable 'male threaded' are screwed into 'female threaded'.Male threads have a thread on the outside of the fitting and female threads have a thread on the inside. When you thread the fitting in, it compresses against the other threads.PTFE tape is used to thread these together and the proper way to assemble threaded fittings is to finger tighten, then add one to two turns but no more. An example of a threaded fitting is a Reducing Nipple Male Threaded which is used to connect between two female threads of different diameters. Link To PVC Fittings

Report a problem

FRP Membrane Housing

Product details

Recently viewed

Similar products

FRP Membrane Housing

Product details

0.0 out of 5

Recently viewed

Similar products