Ftdi (TTL-232RG-VSW3V3-WE) Cable, TTL to USB Converter, Wire-End, 3V3, 1.8m

Product InformationConversion Type: USB to 3.3V TTL ConverterBaud Rate: 3MbaudConverter Connector Type: Free / Stripped EndChip Type: FT232RCable Length - Metric: 1.8mCable Length - Imperial: 5.9ftProduct OverviewThe TTL-232RG-VSW3V3-WE is an USB to UART cable with +3.3V TTL level UARTsignals incorporating FT232RQ USB to serial UART interface IC which handles allthe USB signalling and protocols. The cables provide a fast, simple way toconnect devices with a logic level serial interface to USB. It contains a smallinternal electronic circuit board, utilising the FT232R, which is encapsulatedinto the USB connector end of cable. The other end of cable is wire ended. Thecables can be used for TTL or interface logic over a range to voltage levels.The USB side of the cable is USB powered and is USB 2.0 full speed compatible.The cable is 1.8m long and supports a data transfer rate up to 3Mbaud. Itsupports the FTDIChip-ID, with a unique USB serial number programmed into theFT232R. This feature can be used to create a security or password protected filetransfer access using the cable. This cables require USB drivers, which are usedto make the FT232R in the cable appear as a virtual COM port.Maximum output of 50mA on VCCUSB 2.0 (12Mb/s) full speed compatibleConnect directly to a microcontroller UART or I/O pinsUART interface support for 7 or 8 data bits, 1 or 2 stop bits andodd/even/mark/space/no parityInternal EEPROM with user writeable areaUHCI/OHCI/EHCI host controller compatibleVoltage output power allows external logic to be powered from the USB portEntire USB protocol handled by the electronics in the cable USBSix way outputs provide Tx, Rx, RTS#, CTS#, VCC and GNDLow USB bandwidth consumption