Vehicle Fitment & Part Details
This overhaul MLS gasket set for Suzuki Swift K12M includes valve cover gasket and Suzuki reference 011016301. Confirm compatibility by matching the listed fitment details, any OEM reference numbers supplied, and VIN/engine/chassis information where variants exist.
Key Details
- SKU
- MAP-100895
- Component
- Overhaul MLS Gasket Set
- OEM References
-
- Primary Fitment
- Suzuki Swift K12M (2018-)
- Included
- Valve cover gasket
Key Benefits
- Suzuki OEM reference number is listed for cross-checking before ordering.
- Includes valve cover gasket.
OEM Reference Numbers
Vehicle Fitment
Includes 10 supplied applications.
View Full Vehicle Fitment (10 applications)
| Model | Chassis / Platform | Years | Engine | Power |
|---|
| Swift 1.2 | | 2018- | K12M | 73.00 |
| Swift IV 1.2 4WD | FZ, NZ / AZH412, AZG412, ZD72S | 2012-08 - | 1242 | 67 kW |
| Swift IV 1.2 | FZ, NZ / AZH412, ZC72S | 2010-10 - | 1242 | 69 kW |
| Swift IV 1.2 | FZ, NZ / AZG412, ZC72S | 2010-10 - | 1242 | 66 kW |
| Swift IV 1.2 4x4 | FZ, NZ / AZH412, ZD72S | 2010-10 - | 1242 | 69 kW |
| Swift IV 1.2 4x4 | FZ, NZ / AZG412, ZD72S | 2010-10 - | 1242 | 66 kW |
| Ignis 1.2 GLX | | 2017- | K12M | 73.00 |
| Swift/Dzire 1.2 | | 2014-2017 | K12M | 73.00 |
| Swift 1.4 | | 2011- | K14B | 73.00 |
| Dzire 1.2 | | 2018- | K12M | 73.00 |
Fitment Notes
- Always match OEM reference number(s) and vehicle details before ordering. Confirm exact fitment using VIN, engine code, or chassis number if multiple variants exist.
Important: Engine components such as bearings, pistons, rings, valves, gaskets, and related parts must be installed only by a qualified, VAT-registered workshop using proper measuring and torque equipment. Ensure crankshaft journals are measured and polished, oil clearances verified, and assembly lube applied. Failures due to oil starvation, contamination, incorrect sizing, or improper torque are not manufacturing defects and are not covered under warranty. Always replace engine oil, filters, and gaskets during installation.
Engine Parts Return Policy Warning
Returns Policy Notice: Engine internal components (including bearings, pistons, rings, gaskets, valves, etc.) are non-returnable once the sealed packaging has been opened. Returns are only accepted if the incorrect part was supplied and the item remains sealed, unused, and in original condition. Opened, fitted, dirty, or marked parts cannot be resold and are not eligible for refund or exchange. Please verify engine code, bore/size, and bearing grade before opening any packaging.
Installation / Use / Maintenance Tips
- Ensure all mating surfaces are clean, flat, and free from old gasket material before assembly.
- Replace related seals and one-time-use fasteners where applicable.
- Follow the correct tightening sequence and manufacturer workshop procedure during assembly.
- After installation, check carefully for leaks after the first heat cycle or startup as applicable.
Common Questions
Does this Overhaul MLS Gasket Set fit my Suzuki Swift?
This part (MAP-100895) is listed for the fitments shown on this page. Confirm by matching the fitment details and verifying VIN/engine/chassis information where variants exist.
What OEM part numbers does this cross-reference?
Listed cross-references: 011016301. Match at least one OEM reference to your original part before ordering.
What is included?
Valve cover gasket.
How do I confirm fitment if there are multiple variants?
Use VIN, engine code, and chassis/platform details and compare them to the fitment section above. If unsure, request fitment assistance before ordering.
