This item has closed 1 buyer bought 1 item
View other items offered by The USB Shop8773
Geekworm Raspberry Pi X820 V3.0 SATA HDD/SSD Storage Expansion Board
New
Indicative market price: R1,065.04
R788.92
26% OFF
Closed
9 Jul 19 01:00
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 3 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
2601371
Bob Shop ID
418947617
(V3.0 Upgrade Features)
Using patch process to improve the quality of the X820 V3.0 Board;
Add Powers button switch on the board to control the power supply.
Add upgraded external 5V 2A power output USB port for external device such as cellphone and other device, of course. User can power the raspberry pi via this USB port when GPIO pins are occupied by other expansion board.
Use upgrade Main control chip to solve the problem that the 'reboot' command is not supported in the V1.3 function.
User can directly use the X820 V3.0 board as a mobile hard disk even if you don't power it (tested; with our USB3.0 cable or use a good quality and relatively short USB3.0 cable); PS: In the V1.3 version, you need to power the X820 at the same time as when you use the X820 V1.3 board as a mobile Hard disk;
The HDMI adapter has been removed, which reduces the difficulty of installation; it also facilitates the design and installation of the accessory enclosure;
Two kinds of power supply modes are supported; One of mode is that power the raspberry pi via 2 pin cable by connecting to GPIO2 (5V) and GPIO3(GND) pins, the other one of mode is power the raspberry pi via USB port; PS: DON'T USE THE TWO KIND MODES AT THE SAME TIME;
Note:
Because the PCB layout is changed so that the old metal case for X820 V1.3 version (SKU: 483342) is not fit to X820 V3.0 board, the new metal case will release soon.
Using patch process to improve the quality of the X820 V3.0 Board;
Add Powers button switch on the board to control the power supply.
Add upgraded external 5V 2A power output USB port for external device such as cellphone and other device, of course. User can power the raspberry pi via this USB port when GPIO pins are occupied by other expansion board.
Use upgrade Main control chip to solve the problem that the 'reboot' command is not supported in the V1.3 function.
User can directly use the X820 V3.0 board as a mobile hard disk even if you don't power it (tested; with our USB3.0 cable or use a good quality and relatively short USB3.0 cable); PS: In the V1.3 version, you need to power the X820 at the same time as when you use the X820 V1.3 board as a mobile Hard disk;
The HDMI adapter has been removed, which reduces the difficulty of installation; it also facilitates the design and installation of the accessory enclosure;
Two kinds of power supply modes are supported; One of mode is that power the raspberry pi via 2 pin cable by connecting to GPIO2 (5V) and GPIO3(GND) pins, the other one of mode is power the raspberry pi via USB port; PS: DON'T USE THE TWO KIND MODES AT THE SAME TIME;
Note:
Because the PCB layout is changed so that the old metal case for X820 V1.3 version (SKU: 483342) is not fit to X820 V3.0 board, the new metal case will release soon.