R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable. Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 3 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
For use in in Thermosyphon Solar Systems and Normal Geysers
Description
Use as a geyser timer
Clear display of water temperature, time, day, heating mode and malfunction conditions.
Auto or manual heating.
Easy temperature setting to your requirements (30 - 65C) factory default is 55C.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E2 to E5.
Electronic thermostat with mechanical thermal cut-out at 90C.
Use as timer on a thermosyphon solar system
Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
Auto or manual heating.
Easy temperature setting to your requirements (30 - 65C) factory default is 55C.
Four different temperature settings.
Daily programmable timer with four time settings.
Error conditions alert by warning code E2 to E5.
Electronic thermostat with mechanical thermal cut-out at 90C. Please note the cut-out temperature for solar systems expected to reach temperatures above this temperature.
Technical Parameters
Operating voltage 230VAC / 50HZ.
Main relay contact rating 30AMP (Max 4KW).
Operating voltage range 160V - 250V AC.
Temperature display range 0 - 99C (-5 when below -5C EA when above 99C).
High temperature warning above 84C.
Temperature setting ranges 30 - 65C (heating water electrically).
Heat failure - when increase at a rate of less than 4C per hour.
Mechanical thermal cut-out at 90C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.
Dry heat detection - empty cylinder.
Temperature tolerance 2%.
Temperature differential setting 1C.
Switching differential 6C.
Temperature probe failure detection for tank
Temperature probe range for geyser is -30 to + 130C.