| SPECIFICATIONS |
| CPU | Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/ Intel Celeron processors in the LGA1151 package |
| L3 cache varies with CPU |
| Chipset | Intel B150 Express Chipset |
| Memory | 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory |
| * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory displayed will be less than the of the physical memory installed. |
| Dual channel memory architecture |
| Support for DDR3/DDR3L 1866(OC)/1600/1333 MHz memory modules |
| Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
| Support for non-ECC UDIMM 1Rx8/2Rx8 memory modules |
| Onboard Graphics | 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz |
| 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz |
| * The DVI-D port does not support D-Sub connection by adapter. |
| 1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz |
| * Support for HDMI 1.4 version. |
| Support for up to 3 displays at the same time |
| Maximum shared memory of 512 MB |
| Audio | Realtek ALC892 codec |
| High Definition Audio |
| 2/4/5.1/7.1-channel |
| Support for S/PDIF Out |
| LAN | Intel GbE LAN chip (10/100/1000 Mbit) |
| Expansion Slots | 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
| * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
| 1 x PCI Express x16 slot, running at x4 (PCIEX4) |
| (All of the PCI Express slots conform to PCI Express 3.0 standard.) |
| 2 x PCI slots |
| Multi-Graphics Technology | Support for 2-Way AMD CrossFire technology |
| Storage Interface | 1 x M.2 Socket 3 connector |
| 1 x SATA Express connector |
| 6 x SATA 6Gb/s connectors |
| USB | 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through the internal USB header) |
| 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) |
| Internal I/O Connectors | 1 x 24-pin ATX main power connector |
| 1 x 8-pin ATX 12V power connector |
| 1 x M.2 Socket 3 connector |
| 1 x SATA Express connector |
| 6 x SATA 6Gb/s connectors |
| 1 x CPU fan header |
| 3 x system fan headers |
| 1 x front panel header |
| 1 x front panel audio header |
| 1 x S/PDIF Out header |
| 1 x USB 3.0/2.0 header |
| 2 x USB 2.0/1.1 headers |
| 1 x Trusted Platform Module (TPM) header |
| 1 x Thunderbolt add-in card connector |
| 1 x serial port header |
| 1 x parallel port header |
| 1 x Clear CMOS jumper |
| Back Panel Connectors | 1 x PS/2 keyboard/mouse port |
| 1 x D-Sub port |
| 1 x DVI-D port |
| 1 x HDMI port |
| 4 x USB 3.0/2.0 ports |
| 2 x USB 2.0/1.1 ports |
| 1 x RJ-45 port |
| 6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Line Out, Mic In) |
| I/O Controller | iTE I/O Controller Chip |
| H/W Monitoring | System voltage detection |
| CPU/System temperature detection |
| CPU/System fan speed detection |
| CPU/System overheating warning |
| CPU/System fan fail warning |
| CPU/System fan speed control |
| * Whether the fan speed control function is supported will depend on the cooler you install. |
| BIOS | 2 x 128 Mbit flash |
| Use of licensed AMI UEFI BIOS |
| Support for DualBIOS |
| PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Operating System | Support for Windows 10/8.1/7* |
| * Please download Windows USB Installation Tool to install Windows 7. |
| Form Factor | Micro ATX Form Factor; 24.4cm x 22.5cm |
| Remark | Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. |
| Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website. |
| Warranty Information |
| Warranty | 3 Year |
