Gigabyte H410M H V3 Rev1.3 Micro Atx Motherboard Lga 1200

The Gigabyte H410M H V3 is an LGA 1200 Micro ATX Motherboard that supports 10th generation intel processors only. Motherboard was tested, working 100% as seen in the third image.  It comes with 2 Sata cables, the Driver DVD and manual. Packaging has some usage marks. 

SPECIFICATION:

CPU:

1. Support for 10th Generation Intel Core Processors. Intel Core i9 Processors, Intel Core i7 Processors, Intel Core i5 Processors, Intel Core i3 Processors, Intel Pentium Processors, Intel Celeron Processors in the LGA 1200 Package

2. L3 cache varies with Processor

CHIPSET:

Intel H510 Express Chipset

MEMORY:

1. Intel Core i9/i7 processors:

Support for DDR4 2933/2666/2400/2133 MHz memory modules

2. Intel Core i5/i3/Pentium/Celeron processors:

Support for DDR4 2666/2400/2133 MHz memory modules

3. 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory

4. Dual channel memory architecture

5. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

6. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

7. Support for Extreme Memory Profile (XMP) memory modules

ONBOARD GRAPHICS:

Integrated Graphics Processor-Intel HD Graphics Support:

1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60Hz

2. 1 x HDMI port, supporting a maximum resolution of 4096x2160@30Hz

* Support for HDMI 1.4 version and HDCP 2.3.

AUDIO:

1. Realtek Audio CODEC

2. High Definition Audio

3. 2/4/5.1/7.1-channel

* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first.

LAN:

1. Gigabit Ethernet Chip (1 GB/s/100Mb/s)

EXPANSION SLOTS:

1. 1 x PCI Express x16 slot, running at x16

2. 1 x PCI Express x1 slot 

(The PCI Express slots conform to PCI Express 3.0 standard)

STORAGE INTERFACE:

1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD support)

2. 4 x SATA 6Gb/s connectors

USB:

Chipset:

1. 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

2. 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)

INTERNAL I/O CONNECTORS:

1. 1 x 24-pin ATX main power connector

2. 1 x 8-pin ATX 12V power connector

3. 4 x SATA 6Gb/s connectors

4. 1 x CPU fan header

5. 1 x system fan header

6. 1 x RGB LED strip header

7. 1 x front panel header

8. 1 x front panel audio header

9. 1 x USB 3.2 Gen 1 header

10. 1 x USB 2.0/1.1 header

11. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

12. 1 x serial port header

13. 1 x Clear CMOS jumper

* All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W

BACK PANEL CONNECTORS:

1. 1 x PS/2 Keyboard port

2. 1 x PS/2 Mouse port

3. 1 x D-Sub port

4. 1 x HDMI port

5. 2 x USB 3.2 Gen 1 ports

6. 4 x USB 2.0/1.1 ports

7. 1 x RJ-45 port

8. 3 x audio jacks

I/O CONTROLLER:

iTE I/O Controller Chip 

H/W MONITORING:

1. Voltage detection

2. Temperature detection

3. Fan speed detection

4. Overheating warning

5. Fan fail warning

6. Fan speed control

* Whether the fan speed control function is supported will depend on the cooler you install

BIOS:

1. 1 x 128 Mbit flash

2. Use of licensed AMI UEFI BIOS

3. PnP 1 .0a, DMI 2.7, WfM 2.0, SM BIOS 27, ACPI 5.0

UNIQUE FEATURES:

1. Support for APP Center

* Available applications in APP Center may vary by motherboard model.

Supported functions of each applicatio may also vary depending on motherboard specifications.

@BIOS, Ambient LED, EasyTune, Fast Boot, Game Boost, ON/OFF Charge, Smart Backup, System Information Viewer

2. Support for Q-Flash

3. Support for express Install

BUNDLED SOFTWARE:

1. NORTON Internet Security (OEM version)

2. Realtek 8118 Gaming LAN Bandwith Control Utility 

OPERATING SYSTEM: Support for Windows 10 64-bit

FORM FACTOR: Micro ATX Form Factor, 22.6cm x 18.5cm