Gigabyte Z590I Aorus Ultra Wifi Motherboard

FEATURES

Gigabyte Z590I Aorus Ultra Wifi Motherboard

• Supports 11th and 10th Gen Intel Core Series Processors
• Dual Channel Non-ECC Unbuffered DDR4, 2 DIMMs
• Intel Optane Memory Ready
• Direct 10+1 Phases Digital VRM Solution with 90A Smart Power Stage
• Fins- Array II and Multi-Layered PCH / M.2 Heatsink with Two Heatpipes
• Blazing Fast Intel 2.5GbE LAN with cFosSpeed
• Intel WiFi 6 802.11ax 2T2R & BT5 with AORUS Antenna
• AMP-UP Audio with ALC1220 for Rear 120dB SNR
• HDMI 2.0 supports Premium 4K
• Dual Ultra-Fast NVMe PCIe 4.0*/3.0 x4 M.2 with Thermal Guard
• RGB FUSION 2.0 with Multi-Zone Addressable LED Light Show Design, Support Addressable LED & RGB LED Strips
• Smart Fan 6 Features Multiple Temperature Sensors , Hybrid Fan Headers with FAN STOP and Noise Detection
• Q-Flash Plus Update BIOS without Installing the CPU, Memory and Graphics Card

CPU

• LGA1200 package:
• 11th Generation Intel Core i9 processors / Intel Core i7 processors / Intel Core i5 processors
• 10th Generation Intel Core i9 processors / Intel Core i7 processors / Intel Core i5 processors / Intel Core i3 processors/ Intel Pentium processors / Intel Celeron processors*
• * Limited to processors with 4 MB Intel Smart Cache, Intel Celeron G5xx5 family.
• L3 cache varies with CPU
• Please refer to "CPU Support List" for more information.

Chipset

• Intel Z590 Express Chipset

Memory

• 11th Generation Intel Core i9/i7/i5 processors:
  • Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules
• 10th Generation Intel Core i9/i7 processors
  • Support for DDR4 2933/2666/2400/2133 MHz memory modules
• 10th Generation Intel Core i5/i3/Pentium®/Celeron® processors:
  • Support for DDR4 2666/2400/2133 MHz memory modules
• 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory
• Dual channel memory architecture
• Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
• Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
• Support for Extreme Memory Profile (XMP) memory modules
• Please refer Memory Support List for more information.

Onboard Graphics

• Integrated Graphics Processor-Intel HD Graphics support:
  • 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
  • * Support for HDMI 2.0 version and HDCP 2.3.
• 1 x DisplayPort, supporting a maximum resolution of 5120x2160@60 Hz
  • *Support for DisplayPort 1.4 version and HDCP 2.3.
  • *The DisplayPort does not support HDMI connection by adapter.
• Graphics specifications may vary depending on CPU support.

Audio

• Realtek ALC1220-VB codec
• The back panel line out jack supports DSD audio.
• Support for DTS:X Ultra
• High Definition Audio
• 2/4/5.1/7.1-channel
  • To configure7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

LAN

• Intel 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)
• Wireless Communication module
• Intel Wi-Fi 6 AX200
• WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band

BLUETOOTH 5.1

• Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
  • Actual data rate may vary depending on environment and equipment.

Expansion Slots

• 1 x PCI Express x16 slot, running at x16
• (The PCI Express x16 slot conforms to PCI Express 4.0 standard.)*
• *Supported by 11th Generation processors only.

Storage Interface

• CPU: 1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)*
  • *Supported by 11th Generation processors only.
• Chipset: 1 x M.2 connector on the back of the motherboard (Socket 3, M key, type 2260/2280 SATA and PCIe 3.0 x4/x2 SSD support) (M2P_SB)
• 4 x SATA 6Gb/s connectors
• Support for RAID 0, RAID 1, RAID 5, and RAID 10
• Intel Optane Memory Ready

USB

• Chipset:
  • 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2x2 support
  • 1 x USB Type-C port with USB 3.2 Gen 1 support, available through the internal USB header
  • 3 x USB 3.2 Gen 2 Type-A ports (red) on the back pane
  • 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
  • 2 x USB 2.0/1.1 ports on the back panel
• Chipset+USB 2.0 Hub:
  • 4 x USB 2.0/1.1 ports available through the internal USB header

Internal I/O Connectors

• 1 x 24-pin ATX main power connector
• 1 x 8-pin ATX 12V power connector
• 1 x CPU fan header
• 3 x system fan headers
• 1 x addressable LED strip header
• 1 x RGB LED strip header
• 4 x SATA 6Gb/s connectors
• 2 x M.2 Socket 3 connectors
• 1 x front panel header
• 1 x front panel audio header
• 1 x speaker header
• 1 x USB Type-C® header, with USB 3.2 Gen 1 support
• 1 x USB 3.2 Gen 1 header
• 1 x USB 2.0/1.1 header
• 1 x Clear CMOS jumper
• 1 x chassis intrusion header

Back Panel Connectors

• 1 x DisplayPort
• 1 x HDMI port
• 1 x USB Type-C port, with USB 3.2 Gen 2x2 support
• 3 x USB 3.2 Gen 2 Type-A ports (red)
• 2 x USB 3.2 Gen 1 ports
• 2 x USB 2.0/1.1 ports
• 1 x Q-Flash Plus button
• 1 x RJ-45 port
• 2 x SMA antenna connectors (2T2R)
• 3 x audio jacks
• I/O Controller
• iTE® I/O Controller Chip
• H/W Monitoring
• Voltage detection
• Temperature detection
• Fan speed detection
• Fan fail warning
• Fan speed control

PRODUCT SPECIFICATIONS