GODOX Speedlite Flash TT520 For Canon Nikon Sony Camera
This GODOX Speedlite Flash TT520 is compatible with any camera with the standard hot shoe.
Features:
Power Management
(1) Switch to the ON, the flash will start charging (the charging indicator is dim). After several seconds, the charging indicator turns red and TT520 is ready to shoot.
(2) For a test flash, press the test button. After use, press the ON/OFF to OFF to power off.
(3) If the red charging indicator lamp flickers in every 1s, it indicates low battery. In such case, the power will turn off automatically and you need to replace the batteries.
Power Control
(1) The flash unit has 8 steps of power output control which indicated by 8 pieces of LED lamp for different level.
(2) Press "+" to make power higher and they are 1/128,1/64,1/32,1/16,1/8,1/4,1/2,1/1.Otherwise, press "-" to make power lower.
M Mode
Press the MODE key to M Mode. In this mode, you can set TT520 on to your camera hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the flash power and press the camera shutter, the flash light will flash under the camera synchronous signal
.
S1 Mode
(1) Press the MODE key to S1 Mode. The Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment.
(2) When the flash is S1 mode, it will fire synchronously when the master flash fires, comparable with the effect by the use of radio trigger.
S2 Mode
(1) Press the MODE key to S2 Mode. The mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for TTL flash environment. The flash unit won't flash synchronously with the first flash but the second flash from the master flash.
Power-saving Function
(1) To save battery power, the flash will enter stand-by state in about 30 minutes of idle use. Press any button to wake it up.
(2) In S1/S2 mode, the flash will enter stand-by state in about 60 minutes of idle use. Press any button to wake it up. (3) In Power-saving mode, the charging indicator flickers in every 3 seconds. Other indicators are turned off.
Protection Function
(1) Protection in continuous flashes
To prevent the flash head from getting too hot and damage, please do not flash over 20 times when in power lever 1/2, 1/1. Please cool down the flash unit for at least 10 minutes. The over-temperature protection function will be activated if you continue to flash after 20 times. In this state the charging time will turn to 10-25s. Please cool down the flash unit around 10 minutes and it will turn to normal state.
(2) Systematic over-temperature protection
When the inner circuit is over-heating, which indicates over use of the flash unit, the inner circuit will shut down power automatically. The flash unit will turn to normal state after the inner circuit is cooled down.
NOTE: need an extra adapter for sony camera
Specification:
Guide Number: 33 (ISO 100)
Flash Mode: M, S1, S2
Vertical Rotation Angle: 0~90 degrees
Horizontal Rotation Angle: 0~270 degrees
Power: 4xAA batteries (Alkaline or Ni-MH are usable)
Lighting Times: 100-1500 times (AA alkaline batteries used)
Recycle Time: Approx 0.1-5s (AA alkaline batteries used)
Light Quantity Output Control: with 1/8 - stop increment
Color Temperature: 5600K+200K
Flash Duration: 1/300s~1/20000s
Dimensions: 190*75*55mm
Weight(only the flash): 300g
Package Content
TT520 Speedlite Flash x1
Mini Stand x1
Pouch x1
User Manual
Original Manufactory Package
Consignment
Parcel will be shipped to you by Hongkong Registered Airmail that generally takes 10-20
business days to deliver on your hands.
Please allow up to 24hours preparation for shipping, although usually item send within
24 hours after payment confirmed.
We will not be responsible for item loss because of wrong or undeliverable address.
All of parcels will be declaimed as ‘Gift', and we always try the best to Legally
Minimize your import duties (or GST or V.A.T. or other Taxes). In the most cases of
shipping, there is none duty payable. However, if any additional charges generated for
customs clearance must be borne by customer.
