This item has closed with no items sold
View other items offered by PC Spot350
Green solid cutting compound for stainles/alum anlum alloy 0.9kg
New
R256.00
Closed
21 May 24 01:03
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 2 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
South Africa
Product code
VS-RCC G-13
Bob Shop ID
615683340
Solid polishing compound
Colour: Light green
Weight: 900g
Usage: Cutting compound for stainless steel, aluminium and aluminium alloys.
Application:
Different metals have varying characteristics. To achieve the best possible result, it is essential that the correct compound and polishing buff is selected for the job.
The cutting compound should be used on a Sisal buff or stitched buff. A white stitched buff is ideal for cutting into metals. With the correct compound it will remove stretcher strains, orange peel, polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound on metals. Each fold/leaf of material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. | COLOUR | DESCRIPTION | WEIGHT |
| RCC 20 - AB | RED | General purpose medium cutting for brass, copper and silver. | +/- 1.2kg |
| RCC 11 - SD | GREY | Finishing compound for steel, stainless steel, chrome and aluminium. | +/- 1.3kg |
| RCC 12 - S | BROWN | Cutting and buffing compound for steel, stainless steel, chrome and aluminium. | +/- 1.4kg |
| RCC 1 SDDB | WHITE | Bright finishing compound for stainless steel. | +/- 1.5kg |
| RCC G-13 | LIGHT GREEN | Cutting compound for stainless steel, aluminium and aluminium alloys. | 900g |
| RCC G-14 | DARK GREEN | Finishing compound for all kinds of metals. | 900g |
| RCC SW-1 | PURPLE | Cutting compound for stainless steel. | 900g |
| RCC SW-3 | WHITE | Cutting compound for stainless steel. | 900g |
| RCC SW-2000 | YELLOW | Cutting compound for copper, brass, aluminium, brass and steel | 900g |
The selection of stitched buffs:
| ORDER NO. | MATERIAL | WIDTH | DIAMETER | SECTIONS | BORE |
| TCBF150-2C | DENIM | 30mm | 150mm | 2 | 1/2' |
| TCBF150-3C | DENIM | 30mm | 150mm | 3 | 1/2' |
| TCBF200-2C | DENIM | 20mm | 200mm | 2 | 1/2' |
| TCBF100-2W | COTTON | 20mm | 100mm | 2 | 1/2' |
| TCBF150-2W | COTTON | 20mm | 150mm | 2 | 1/2' |
| TCBF150-3W | COTTON | 30mm | 150mm | 3 | 1/2' |
| TCBF200-2W | COTTON | 20mm | 200mm | 2 | 1/2' |
| TCBF200-3W | COTTON | 30mm | 200mm | 3 | 1/2' |
| TCBF10030 | Buffing wheel kit 100mm Cotton, Denim & Sisal | 1/2' | |||
| TCBF15030 | Buffing wheel kit 150mm Cotton, Denim & Sisal | 1/2' | |||
The selection of unstitched buffs:
| ORDER NO. | MATERIAL | WIDTH | DIAMETER | PLY | BORE |
| TCBF150-50W | COTTON | 150mm | 50 | 1/2' | |
| TCBF200-50W | COTTON | 200mm | 50 | 1/2' |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.