This item has closed 1 buyer bought 1 item
View other items offered by Racer Gadgets10211
GSM GPRS SIM900 1800MHz Short Message Service m590 SMS Module DIY Kit For Ardui
New
Indicative market price: R299
R136.05
54% OFF
Closed
18 Jun 16 12:36
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 3 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buyer Protection
How you're covered
Get it now, pay later
Product information
Condition:
New
Location:
South Africa
Product code:
1043437
Bob Shop ID:
230823935
GSM GPRS SIM900 1800MHz Short Message Service m590 SMS Module DIY Kit For Arduino
Specification:
Voltage: 5V
Frequency: 900 1800 MHz
Stand by current: < 10 mA
Working current: < 80 mA
Baud: 9600 or change by sending AT+IPR=xxxx
Interface: TTL
Commands: Regular AT commands
Connector: 5V GND TxD RxD
Antenna: Please solder a copper wire to the board or use an IPEX socket
Temperatures: -30 C to 80 C
Functions: Send/receive SMS messages and GPRS data.
Feature:
Excellent for remote sensing, experiments, alarms and automatic data collection.
The control port is a regular serial port. You may connect it directly with a microcontroller such as Arduino. Or you can use a USB to serial port adapter and send commands directly from a computer.
If you also need a USB to serial adapter, please contact us.
A complete instruction for using the AT commands will be provided.
Package includes:
1 x DIY Kit
Specification:
Voltage: 5V
Frequency: 900 1800 MHz
Stand by current: < 10 mA
Working current: < 80 mA
Baud: 9600 or change by sending AT+IPR=xxxx
Interface: TTL
Commands: Regular AT commands
Connector: 5V GND TxD RxD
Antenna: Please solder a copper wire to the board or use an IPEX socket
Temperatures: -30 C to 80 C
Functions: Send/receive SMS messages and GPRS data.
Feature:
Excellent for remote sensing, experiments, alarms and automatic data collection.
The control port is a regular serial port. You may connect it directly with a microcontroller such as Arduino. Or you can use a USB to serial port adapter and send commands directly from a computer.
If you also need a USB to serial adapter, please contact us.
A complete instruction for using the AT commands will be provided.
Package includes:
1 x DIY Kit