Portable GPS signal shielding jammer technical parameters:
Input voltage: 12-24v;
Access to the cigarette lighter can be used normally;
Radius of action: 15M
Portable GPS signal shielding jammer features:
1. Effectively guard against GPS satellite positioning! Beidou satellite positioning;
2. Effectively interfere with GPS satellite signals to protect your whereabouts privacy and information confidentiality.
3, only interfere with GPS satellite signals and Beidou satellite positioning, does not affect the normal reception of mobile phones.
4, small size, high power, light weight, large coverage, easy to carry.
5, effectively prevent the positioning of the car / mobile phone GPS satellite positioning system,! Going out and no longer worry about being protected, the protection of the whereabouts!
Product introduction:
The car GPS series signal shielding device is the third generation green GPS signal shielding device, which only shields the receiving signal of the on-site GPS terminal, and has no negative influence and interference on communication and transmission of other electronic devices around. This machine adopts dual output and can cover all kinds of GPS signals such as all positioning terminals within the range of 15-50 meters (depending on the strength of satellite signals), so that all GPS positioning terminals within the shielding range are completely connected with the outside world. Interrupted. The rated working voltage of this product is 12-24V. Both the cart and the trolley can be used directly, the working frequency bandwidth is 20MHz, the frequency range is: 1560-1580MHz; 1150-1250MHZ.
Instructions for use:
1. Take out the GPS device and install the antenna.
2. Insert the corresponding cigarette lighter port of the car.
3. When the device is powered on, the indicator lights up and works normally.
4. Remove the GPS signal blocker directly when you are finished using it.
Monitor the platform speed, stay still before moving or no
Precautions:
Pay attention to the following points when using the car GPS shield:
1. Is the shielded antenna intact?
2. Is the interface between the antenna and the instrument tight?
3. Whether the inserted instrument is in good contact with the cigarette lighter of the vehicle.
maintenance
1 The shield is maintenance-free and requires no maintenance.
2 When wiping the surface, use chemical solvents and avoid water in the machine.
3 When the shielding device is useful, it should be stored in a dry and ventilated place to avoid prolonged contact with salt spray and harmful gases.
| General |
|---|
| Brand | HakkaDeal |
| Model | DY2 |
| Material | ABS |
| Quantity | 1 set |
