HDMI Audio Extractor to Optical Toslink or Analog Stereo Audio | 4k 60hz HDMI Passthrough
45 were available / new
R589.00
0% off
Shipping
R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable. Check my rate
The seller has indicated that they will usually have this item
ready to ship within 3 business days.
Shipping time depends on your delivery address.
The most accurate delivery time will be calculated at checkout,
but in general, the following shipping times apply:
HDMI Audio Extractor to Optical Toslink or Analog Stereo Audio | 4k 60hz HDMI Passthrough
The Audio Extractor is used to extract audio from any HDMI Stream from e.g HDPVR / DSTV Explora Decoder, Sony Playstation, Microsoft Xbox, Blu-ray Player etc and output it to a Dolby Digital 5.1 capable Optical Toslink port or Stereo RCA Port. Please note input audio should not exceed Optical 5.1 Dolby Digital specifications and streams such as 7.1 Master DTS or above 5.1 Audio cannot be extracted. These extractors are commonly used to extract audio to a Soundbar or a Home Theatre system capable of Optical Toslink Audio Inputs.
Specifications:
HDMI resolution input / output : up to 4k Ultra HD 60z (3840 x 2160 60Hz), 1080p and 720p and lower resolutions also supported.
Audio Outputs : Optical Toslink for Dolby Digital 5.1/2.0 - Can be forced by switch on device, Analog RCA Red/White Audio Outputs