HDMI Audio Splitter Product Features
This HD full HD support 3D, 4K x 2K, ARC HDCN0020M1 audio splitter, you can connect the HDMI source to a single HDMI display device (such as TVs, projectors) and independently output stereo +SPDIF signal, to achieve audio HDMI signal synchronization Detach, and support ARC audio return function.
One way HDMI dual mode input, converts to one HDMI+ Audio (SPDIF+R/L) output
Audio output support: SPDIF+ analog R/L, full HD, full 3D, 4K x 2K
Support ARC function: In the case of high-definition TV directly receiving audio and video content, the HDTV will be directly transmitted to the A/V amplifier receiver via the HDMI cable, without the need for another cable.
HDMI dual-mode operation, terminal two ports, effectively reducing the number of interfaces
Audio synchronization output can be achieved, there are three audio modes ADV, 2.0CH, 5.1CH can be selected
LED indicator, when the signal source or signal terminal is in working condition, the corresponding indicator will light up.
HDMI Audio Splitter Action of Toggle Switch
Audio output mode selection switch can realize 2CH, 5.1CH, ADV (advance Audio) three modes cycle switching (When switching to 5.1CH, the digital signal receiving terminal must support DTS/DOLBY-AC3 decoding, otherwise input DTS/DOLBY - There is no sound output for the AC3 signal. To output the sound, switch to 2CH. When the audio mode is in ADV (advance Audio), the sound output will be based on the audio format supported by the backend. For example, the back end has access Support 7.1 decoding HDMI interface amplifier device, the distributor will output 7.1 channel audio signal, (When the signal source output signal is 7.1 channels))
HDMI audio splitter using method and function description
Connect the mobile device to the audio splitter's input port via an HDMI cable and a high-definition source (HDMI interface) or via an MHL-HDMI cable in the accessory.
Connect the HDMI display device to the HDMI output of the audio splitter.
Use an audio cable to connect the audio splitter R/L interface to the audio equipment.
Use a fiber optic cable to connect the audio splitter SPDIF interface to the audio equipment
HDMI resolution
24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support video color format
24bit/deep color 30bit, 36bit
Audio output
Left and right channel and fiber output
Maximum transmission bandwidth
300MHz
Baud rate
9.0Gbps
Input/output TMDS signal
0.5~1.5Volts p-p
Input/output DDC signal
5Volts p-p (TTL)
Input cable length
≤15m AWG26 HDMI standard cable
Output cable length
≤20m AWG26 HDMI standard cable
Maximum operating current
500mA
