Please take note the body is red and the led's colour is amber
Product Details
LED Safety Flares are a safe, eco-friendly, highly visible, rugged, waterproof and cost effective alternative to conventional incendiary road safety flares. The rechargeable 16-LED flare is made of crushproof polycarbonate plastic with an impact resistant rubber housing. It features 9 different flash patterns that are visible up to 1/2 mile. The housing is waterproof to a depth of 33 feet and will float. It also includes a strong magnet to attach it to any magnetic metal surface.
What is an LED Safety Flare?
It is a flameless, non-toxic, battery-powered flare in a plastic crushproof enclosure that is illuminated by multiple ultra-bright LED lights instead of a flame.
Non-Toxic LED Flares Are Eco-Friendly
Traditional incendiary flares are neither safe nor eco-friendly. Not only do they produce a hazardous, visible smoke, they also contain a highly toxic chemical contaminant called perchlorate. A study conducted by the Rhode Island Department of Health found that, “240,000 gallons of water could be contaminated by discarding a single flare in the water source”. LED flares will not contaminate ground water and do not produce smoke or ash.
Key Features
LED Flares Are Better Than Traditional Incendiary Flares
- Highly Visible - 16 super bright LEDs that can be seen from 1/2 mile
- Cost Effective - You'll save money when you use LED Flares instead of incendiary flares
- Extremely durable - high impact plastic that is crush proof and corrosion proof
- Reusable - Powered by rechargeable lithium ion batteries
- Eco-Friendly - will not contaminate ground water and does not produce smoke or ash.
- Safe - will not ignite fuel or cause a fire if tipped over
- Flameless - will not cause burns when handled or scorch pavement
- Waterproof for use in inclement weather
- Submersible to 33 feet so it may be used for marine applications. Will float unless secured.
- 9 flashing patterns including SOS Rescue (Morse code)
- Compact design that allows for easy storage
- Powerful built in magnet - attach to any magnetic metal surface. Place on a vehicle, fence, or
other metal surface. - Can be used in any vehicle
- Flares will keep a full charge for 90 days.
- NFPA, DOT (FMCSA) and MUTCD compliant
- Qualifies for Fireman's Relief Funding
Applications
LED Safety Flares Have Many Uses. Use them in cars, trucks, boats, RVs, semi-trucks, construction zones and emergency response vehicles.
- Identifying road hazards or closures
- Vehicle breakdowns
- Traffic control on fire and emergency scenes
- Cordoning off police scenes and DUI checkpoints
- Evacuation routes
- Fuel spill warning
- Signal for help
- Power failures or blackouts
- Helicopter landing zones
- Underwater scuba or repair applications.
Specifications
| Waterproof | Yes |
| Crush Proof | Yes. Can withstand the impact of roadside
traffic. Can even be run over by a truck and still operate. |
| Battery | Built in Rechargeable Lithium Ion 700 mAh ~ 3.7V
|
| Battery Shelf Life | 5 years. Will keep a full charge for 90 days. |
Charging Specifications - Individual Units
120V AC/DC Charger: (UL Listed) | Input: 100-240V AC, 50-60 Hz 0.15A
Output: 5.0 V DC 1000 mAh |
Charging Specifications - Individual Units
12V DC Charger: (CE) | Input: 12-24V DC; Output: 5.0V 850 mAh |
Charging Specifications - 6 Pack Kits
120V AC/DC Charger: (UL Listed) | Input: 100-240V AC, 50-60Hz 0.5A
Output: 5.5V, 450mA, 4.0V DC 1000 mAH |
Charging Specifications - 6 Pack Kits
12V DC Charger: (CE) | Input: 12-24V DC; Output: 5.5V, 1500 mA |
| Charging Times: | 1-3 flares = 2-6 hours; All 6 flares = 12-14 hours |
| Number of LED Bulbs | 16 |
| Visibility | Up to 1/2 mile |
| Number of Flash Patterns | 9 |
| Magnetic Mount | Yes - Built In N35 magnet |
| Usable With Traffic Cone | Yes |
| Submersible For Diving | Yes to 33 Feet |
| Buoyant | Yes |
| Temperature Range | -32ºF TO 240ºF (-36ºC - 116ºC) |
| LED Flare Weight | 10 oz |
| LED Flare Dimensions | 4.25” L x 4.375” W x 1.375” H |
| 6 Pack Recharging Case Weight | 6.5 lbs |
| 6 Pack Recharging Case Dimensions | 17.5” L x 14.5” W x 2.5” H |
| Limited Warranty | 1 Year |
| DOT & Traffic Safety Compliance: | 1. U.S. DOT (FMCSA) 49 CFR § 392.25 & 393.95 (g)
(prohibits the carrying of any flame-producing flare
on any Commercial Motor Vehicle (CMV) transporting
explosives; any cargo of flammable liquid or flammable
compressed gas, whether loaded or empty; or any CMV
using compressed gas as a motor fuel).
2. MUTCD Type A (flashing) and Type C (solid on)
3. NFPA 1901 Standards for Traffic |
Flashing Patterns
Battery life is dependent upon which flashing pattern is used. The stand-by charging feature allows flares to be kept plugged in when not in use without damage to the battery or unit. When fully charged you may expect these run times*:
What's Included
Single Pack Includes:
- 1 LED Flare
- 120 Volt Wall Charger
- 12 Volt Car Charger
- USB Cable
