Hikvision 30W PoE Injector DS-2PA3000-POE
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
The Hikvision DS-2PA3000-POE is a 30W Gigabit PoE injector designed to deliver network data and electrical power to compatible IP devices over a single Ethernet cable. Supporting IEEE 802.3af and IEEE 802.3at PoE standards, it provides up to 30W of output power together with 10/100/1000Mbps data transmission. Integrated electrical protection, status indicators and a wide operating temperature range make it suitable for professional IP surveillance and network installations.
The DS-2PA3000-POE delivers up to 30W of power through its PoE Ethernet connection. Compatibility with IEEE 802.3af and IEEE 802.3at standards enables it to power suitable network devices without requiring a separate power connection at the device location.
Two adaptive 10/100/1000Mbps RJ45 ports provide Gigabit Ethernet connectivity. The DATA/IN interface connects to the upstream network, while the PoE/DATA interface carries both network traffic and electrical power to the connected powered device.
By combining power and network data over an Ethernet connection, the DS-2PA3000-POE can simplify installation of compatible IP surveillance and networking equipment where a PoE-enabled network switch is not available. This is particularly useful for adding an individual PoE-powered device to an existing network.
The injector incorporates output over-current and short-circuit protection, while published product information also specifies surge protection. These protective functions are designed to improve reliability when the injector is used in professional network and surveillance installations.
Integrated LED indicators provide visual confirmation of power and PoE operating status. Published specifications state that the module is operating normally when the MID and END indicators are illuminated.
The DS-2PA3000-POE is specified for operation between -20°C and 60°C with operating humidity from 5% to 90%. Its compact 185 × 70.8 × 37mm enclosure allows it to be integrated into network cabinets and other suitable equipment locations.
| Specification | Details |
|---|---|
| Brand | Hikvision |
| Model | DS-2PA3000-POE |
| Associated Model | LAS30-57CN-RJ45 |
| Product Type | PoE Injector |
| PoE Standards | IEEE 802.3af / IEEE 802.3at |
| Maximum Output Power | 30W |
| Output Voltage | 56V DC (-4% to +2%) |
| Ethernet Data Rate | 10/100/1000Mbps |
| Ethernet Interfaces | 2 × Adaptive 10/100/1000Mbps RJ45 |
| Input Network Port | 1 × DATA/IN RJ45 |
| PoE Output Port | 1 × PoE/DATA RJ45 |
| AC Input Voltage | 100—240V AC |
| Protection | Output Over-Current / Short Circuit / Surge Protection |
| AC Port Surge Specification | L-N: 2kV; L/N-PE: 4kV |
| PoE Port Surge Specification | 1kV Differential Mode |
| Ethernet Port Surge Specification | 1kV Differential Mode |
| LED Indicators | Power and PoE Status |
| Normal Status Indication | MID and END LEDs On |
| Operating Temperature | -20°C to 60°C |
| Operating Humidity | 5% to 90% |
| Dimensions (L × W × H) | 185 × 70.8 × 37mm |
| Weight | 473g |
| Compliance | CE / RoHS |
| Primary Application | PoE Power and Gigabit Data Delivery for Compatible IP Surveillance and Network Devices |
The Hikvision DS-2PA3000-POE provides a convenient way to add IEEE 802.3af/at PoE power to a Gigabit Ethernet connection. With up to 30W output, dual Gigabit RJ45 interfaces, integrated electrical protection and a compact enclosure, it is well suited to powering compatible IP cameras and other PoE network devices where a PoE-enabled switch is not available.