Hiland UN0 DIY Kit Build Your Own Un0 Board Compatible with Arduino Un0 Motherboard

Description:
Now, you can build your own UN0 development board through a simple production process! Compatible with ArduinoUN0motherboard, using the original ATMEGA328P-U as the main control chip, and the original CH340C as the USB to TTL driver chip. It is very stable under WINXP, WIN7, WIN8, and WIN10 systems! The win10 system can automatically install the driver. WinXP, win7, win8 need to manually install the driver (CH341SER.EXE file in the attachment), or use the driver wizard to install it automatically. The kit has already burned theUN0bootloader program and the Blink test program. You only need to solder and assemble it correctly. After the soldering is completed, power on, and the LED marked L will turn on and off at one-second intervals, and you can start exploring the magic with ArduinoUN0board. Use a MINI USB cable for power supply and communication. After the production is completed, connect the motherboard to the computer, install the CH340 driver, open the IDE (you can download it on the website), select the corresponding port (COM), and select the type of development boardUN0, you can upload programs through the USB interface, and the TX and RX indicator lights will flash during upload. Driver:
Production suggestion:
1. It is recommended to use a pointed soldering iron for soldering, because the package contains chip IC, and certain soldering experience is required. 2. Operate as short as possible when soldering the LED to avoid high temperature damage to the LED. 3. Soldering the CH340C first, and then solder other components. Development board size: 80*36mm Installation hole distance: 72.6*27.9mm Interface form: MINI-USB (communication and power supply), IC SP
Package included:
1 xUN0DIY Kit