Hilsen Basic Harness (SC1)

HARNESS SUPPLIED COMPLETE WITH A SINGLE LEG, ENERGY ABSORBING LANYARD WITH SCAFFOLD HOOK, PERMANENTLY ATTACHED

Application Fall arrest 

Attachment Dorsal position (for fall arrest) 

Features Easy to fit harness, lightweight 

Lanyard Set Single leg lanyard and scaffold hook, energy absorbing element, 1.75m long (including energy absorber) 

Adjustment Leg straps (standard buckles), chest strap (25mm dee rings)

Sizing Small, medium, large, XL and 2XL

Options Can be fitted with a Hilsen Harness Step, can be supplied with a 45mm chest strap, can be supplied with a double leg lanyard

Disclaimer and product limitations
Maximum weight of user (including clothing, PPE and tooling) is 100kg up to Fall Factor 1, and 120kg up to Fall Factor 2.
Adequate training on correct use of this equipment must be provided to the user by a competent person before this equipment is
issued for use. Simply reading the equipment user instructions does not suffice as adequate training. This equipment must not be
used by a person with any medical condition that could affect their safety when using the equipment in normal or emergency use.
It is recommended that at least every three months the fall arrest system (or component) or other equipment be inspected by a
competent person. This equipment is intended to be used for 'fall arrest', 'work restraint' and/or 'rope access' as indicated. This
equipment is not intended to be used for any other purpose other than indicated and may not be used outside of its limitations. This
equipment becomes obsolete 5 years from manufacture date, regardless of the condition of the equipment. This equipment must
be used strictly in accordance with the instructions given and without deviation. This equipment is used entirely outside of the manufacturers control and accordingly the manufacturer cannot be held liable for any loss, claim or liability arising from any failure of this
equipment from any cause whatsoever.

Component Material properties
Primary webbing Polyester 44mm wide with breaking strength of 22kN
Steel dee ring Breaking strength of 3 ton
Standard buckle Alloy steel 2/3 bar buckle so suit 44mm webbing
Plastic insert Polypropylene molded insert
Hook Steel double action scaffold hook with breaking strength of 22kN
Tear webbing Polyester 44mm wide manufactured to perform to SANS 50355:2003 Energy absorbers
Heat shrink Clear plastic sleeve 67mm
Yarn Polyester thread with colour contrasting to webbing colour
Chest strap webbing Polyester 25mm wide
Chest strap buckle Alloy steel dee ring so suit 25mm webbing
Label Textile material 40mm wide with thermal transfer