Humzor NexzDAS Pro + 10 Tablet Full OBD2 Systems Diagnostic Tool With IMMO, ABS, EPB, SAS, DPF, ECT

Humzor NexzDAS Pro + 10” Tablet Full OBD2 Systems Diagnostic Tool With IMMO, ABS, EPB, SAS, DPF, Oil Reset, Key Programming 

SHIPPING 5 TO 10 WORKING DAYS

Humzor NexzDAS 10.1 inch Bluetooth diagnostic device based on the Android 7.0 multitasking operating system, it offers quick access to readable / readable codes for all available modules of vehicle brands such as IMMO / ABS / EPB / SAS / DPF / Oil reset 

NexzDAS Pro Features:

1. Full-diagnostic system:

• Quick Scan: Read / erase codes for all systems, enter VIN and recognize it automatically, or manually select vehicle type, type and year to start quick scan of all control units and obtain the result of the inspection with a detailed description of the DTC.
• Activation test: Perform tests on certain vehicle components and access vehicle-specific subsystems. It can vary depending on the brand, model, type, year; only those that are available will be displayed.

2. Special Functions:

• Note: These special functions do not apply to all car models; if you are confused, send me your car model and we will check it for you.
• Oil Reset: Performs a reset of the service mileage and data intervals for a new calculation of the engine oil life system after the oil has been changed.
• TPMS Reset: Allows the TPMS sensor to display the sensor IDs from the vehicle computer, enter the TPMS sensor replacement IDs and activate the TPMS sensors.
• Adjust the injector: The diesel injector code requires a programming identifier and parameters in the ECU for precise communication and an injection control system.
• EPB Reset: It is important for maintaining safety and efficiency of the electronic braking system when replacing brake pads or the engine.
• DPF: Works especially for the diesel particulate filter system with DPF regeneration, learning to replace DPF components and learning DPF after replacing the engine control unit.
• TPS / Throttle Sensor: The vehicle's throttle position system sensor is connected to the throttle pin and is primarily used to monitor the throttle position in an internal combustion engine. Due to its location, the butterfly position sensor is able to effectively observe the positioning of the butterfly butterfly.
• Bleeding in ABS: The automatic bleeding procedure is used on vehicles equipped with the BOSH 5.3 system. This procedure uses an analysis tool to cycle the system's solenoid valves and operate the pump to purge air from the secondary circuits.
• SAS Reset: Helps to clear the steering angle sensor memories and plays an important role in the calibration of the steering angle sensor.
• Battery change: Allows the analyzer to assess the state of charge of the battery, monitor the closed circuit current, record the replacement of the new battery and activate the rest state of the vehicle battery.