Hyper SS Nitro RTR w/H-2802T & Turbo Plug 14kg servos 2.4G (White) ("HB-SS-C28W") - 5kg
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product information
This is the Hobao Glow Powered, Radio Controlled, 1/8 scale,
Ready to Run Hyper SS Off Road Racing Car with White Body.
FEATURES
Chassis: Aluminum 0.14" (3.5mm), gun metal gray in color, separate plastic side guards
Drive: Four wheel shaft
Engine: Hobao Mac Star 28 with slide valve carb, Hobao T4 turbo platinum glow plug, and large plastic pull-start handle
Exhaust: Aluminum tuned pipe with polished natural finish
Radio: Hobao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering and throttle, charge jack on transmitter for optional NiCd batteries, high output digital steering and throttle servos
Suspension: C-hub front, newly designed front and rear lower composite suspension arms, front and rear stabilizer bars
Shocks: Aluminum body 17mm Big Bore oil-filled
Shock Towers: 0.16" (4mm) thick aluminum
Fuel Tank: 5oz (150cc)
Clutch Bell: 15T steel
Tires: Low tread L-pattern with foam inserts, 4.32" (111mm)
Wheels: Revo style, black in color, 17mm hex
Body: Trimmed and painted with black, red, gray and white color scheme
Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
INCLUDES
RTR Hyper SS Off-Road car with .28 cu in (4.6cc) Engine, 3-ch Radio,
Steering and Throttle Servos, black plastic Rear Wing, Decal Sheet painted Body and Instruction Manual
REQUIREMENTS
AA Batteries: Twelve, 8 for radio, 4 for receiver
Nitro Fuel: Car blend with 15-30% nitro content, 30% required for engine break-in
Track and maintenance equipment
SPECIFICATIONS
Vehicle;
Length: 19.8" (510mm)
Width: 12" (308mm)
Height: 7.2" (180mm)
Wheelbase: 12.8" (330mm)
Front Track: 10.33" (265mm)
Rear Track: 10.14" (260mm) distance between outer edges of wheels measured side-to-side
Weight: 7.62lbs (3450g)
Body;
Length: 12.8" (325mm)
Width: 7.5" (190mm)
Height: 3.8" (96mm)
Carburetor Needle Settings;
Factory Default After Break-In
Top End (high speed): 2-1/2 turns out 2-2-1/4 turns out
Bottom End (low speed) 1/2 turn out flush w/ball collar
Mid Range: Flush-do not touch Flush-do not touch
Idle Screw 1mm (1/16" ) 1mm (1/16" )