HYSTOU PO9B-J4125-6L Embedded Intel Celeron J4125 Processor Six Network Ports Mini Host, Specific...
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
EDA005375603
Bob Shop ID
595621671
1. Power input: 12V/5A
2. Support system: Win10\Win11\Linux
3. Working environment temperature: -10 degrees to 50 degrees
4. CPU: Intel Celeron J4125 (4M cache, base frequency 2.0 GHz up to 2.70 GHz 4 cores 4 threads)
5. TDP: 10W
6. Photolithography: 14nm
7. Memory slot: 2xDDR4 260Pin SODIMM, maximum support 24G, installing more than 24G memory will result in failure to enter the system
8. Supported memory frequency (speed): 2400Mhz
9. Sound card: no 3.5mm audio port, 1xintel sound card, HDMI port transmission
10. I/O interface: 2xUSB3.0, 2xUSB2.0, DC input port x1, 4xRJ45, 2x external antenna interface for WiFi module/4G module signal gain, 1xDB 9Pin RS232
11. Video port: 1xHDMI 4K/30Hz
12. Storage ports: 1xMSATA, 1xSATA3.0, for installing 2.5-inch HDD/SSD
13. Expansion slot/mainboard common interface: 1xMPCIE full-height slot for installing WIFI module/3G/4G module, 1x9 Pin USB 2.0 header for extending USB port, 1xSMI card slot for standard SIM card, 1xFP1 row Pins for extending Power sw, Reset, Power LED, HDD LED
14. Installation method: put on the desktop, support VESA hanger, support rail hanger
15. Graphics card model: Intel UHD Graphics 600
2. Support system: Win10\Win11\Linux
3. Working environment temperature: -10 degrees to 50 degrees
4. CPU: Intel Celeron J4125 (4M cache, base frequency 2.0 GHz up to 2.70 GHz 4 cores 4 threads)
5. TDP: 10W
6. Photolithography: 14nm
7. Memory slot: 2xDDR4 260Pin SODIMM, maximum support 24G, installing more than 24G memory will result in failure to enter the system
8. Supported memory frequency (speed): 2400Mhz
9. Sound card: no 3.5mm audio port, 1xintel sound card, HDMI port transmission
10. I/O interface: 2xUSB3.0, 2xUSB2.0, DC input port x1, 4xRJ45, 2x external antenna interface for WiFi module/4G module signal gain, 1xDB 9Pin RS232
11. Video port: 1xHDMI 4K/30Hz
12. Storage ports: 1xMSATA, 1xSATA3.0, for installing 2.5-inch HDD/SSD
13. Expansion slot/mainboard common interface: 1xMPCIE full-height slot for installing WIFI module/3G/4G module, 1x9 Pin USB 2.0 header for extending USB port, 1xSMI card slot for standard SIM card, 1xFP1 row Pins for extending Power sw, Reset, Power LED, HDD LED
14. Installation method: put on the desktop, support VESA hanger, support rail hanger
15. Graphics card model: Intel UHD Graphics 600