iJoy RDTA Box 200W VW Kit - IJoy Silver

The iJoy RDTA Box 200W Kit is the next generation of vaping systems, integrating an ultra-versatile IMC interchangeable build deck in a rebuildable and premade coils configuration combined with a staggering 12.8mL capacity all in a modern, easy-to-use platform for a new level of experience. Designed from the ground up with an emphasis on creating a fully ergonomic rebuildable apparatus, the iJoy RDTA Box integrates a versatile chamber that implements a gold-plated build deck with interchangeable functionality. The crowning feature of the iJoy RDTA Box is the incredibly rich ecosystem of eleven interchangeable deck options that is compatible with the iJoy COMBO RDTA and Limitless RDTA - Classic Edition, unprecedented in any other platform while excelling in usability and effectiveness. Included with each iJoy RDTA Box 200W is the IMC-3 deck, built with the tried-and-true two-post, quad terminal design inspired by Velocity-style building elements. For premade sub-ohm coil option, the kit comes with a 0.15ohm IMC-Coil 3 for convenient usability, rated for 50 to 100W. Each deck features large wicking ports, allowing cottons to be properly saturated from the absolutely massive 12.8 milliliter refillable reservoir below the rebuildable structure. It features a 15mm diameter wide filling hole, along with a built-in LED light for e-juice gauging and cleaning. The iJoy RDTA Box is constructed with futuristic design elements, featuring an intuitive 0.96 Inch OLED Display and oversized firing mechanism. The structural architecture also allows for a compact, single-handed operation, powered by dual high amperage 18650 battery (sold separately). The chipset is notably intelligent, capable of firing up to 200W of output with unique Custom User Mode and temperature control suite with support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. One of the most brilliantly engineered and designed platforms to date, the iJoy RDTA Box 200W Kit is the absolute perfect device for building enthusiasts.

iJoy RDTA Box 200W Features:

Dimensions: 105mm by 55mm by 28mm

Dual High Amp 18650 Batteries - Sold Separately

12.8mL Tank Reservoir

All-In-One Design

Wattage Output Range: 5-200W

Voltage Output Range: 1-8W

Minimum Atomizer Resistance: 0.05ohm

Temperature Range: 200-600F

Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements

Unique Custom User Mode

95% Energy Conversion Rate

Intuitive 0.96 Inch OLED Display

Oversized Firing Mechanism

20.5mm Gold-Plated Build Deck

Interchangeable Build Deck Design - 11 Options

IMC-1 - Two-Post w/ Clamp Mechanism

IMC-2 - Spring-Loaded Two-Post w/ Clamp

IMC-3 - Two-Post, Quad Terminals (Side Secured)

IMC-4 - Two-Post, Two Terminals (Top Secured)

IMC-5 - Two-Post, Two Large Terminals (Four-Point Secure)

IMC-6 - Split-Positive Post, Four Terminals (Top Secured)

IMC-7 - Postless, Four Terminals (Side-Secured)

IMC-8 - Raised Postless, Four Terminals (Side-Secured)

IMC-9 - Raised Postless, Four Terminals (Side-Secured)

IMC-Coil - 0.3ohm Premade Coil - rated for 40-80W

IMC-Coil 3 - 0.15ohm Premade Coil - rated for 50-100W

Signature 15mm Wide Fill Port - Top-Fill

Built-In LED Light

Dual Side Adjustable Airflow - Knurled Top Cap

Delrin Widebore Drip Tip

MicroUSB Port - Firmware Upgradeable

Spring-Loaded Gold-Plated 510 Connection

Package Includes:

1 iJoy RDTA Box Mod

1 IMC-3 Build Deck

1 0.15ohm IMC-Coil 3

1 Nylon Brush

1 Phillips Screwdriver

1 MicroUSB Cable

2 Prebuilt Fused Clapton Coils

2 Organic Cotton Pads

Spare Parts & O-Rings

Instructional Manual

In order to use temperature control feature, it requires use of nickel coils or titanium coils and must be built with non-resistant wire.

Do not use Ni200, Titanium, and Stainless Steel with non-temperature control devices/mods. This is a risk of battery explosion! Please make sure that the devices/mods that you are using is capable of controlling coil temperature.

Warning: This tank is a Sub-Ohm resistance atomizer and only work on mechanical mod or devices that can handle Sub-Ohm resistance of 0.5ohm or lower. Please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.