IP65 Z Axis Zero Setter Tool Pre Setter 500.001mm Digital Display CNC Tool Setting Instrument for

20 available / new

R1,964.00

Shipping

R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate

The seller has indicated that they will usually have this item ready to ship within 12 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Seller

szulou3647

92.90 % Positive ratings

Buyer protection

How you're covered

Returns

Replacement Guarantee: 7 Days: We stand by this guarantee

Get it now, pay later

Condition

New

Location

International

Bob Shop ID

645878154

Description:
IP65 Z Axis Zero Setter Tool Pre Setter 50&pm;0.001mm Digital Display Tool Setting Instrument for CNC Router Photoelectric

Specification: - ON/OFF/ZERO: Short press this button to start and zero setting; long press for 3 seconds to shut down. - Powered by a CR2032 3V button battery(No include ) - Body height 50mm - Range 0-2.5mm - Reading resolution: 0.001mm - Accuracy error: 0.005mm Features:
- Large screen LCD display, clear and easy to read. - Z axis setter is a hardware tool used to calibrate and set the length of CNC machine tools. The set height is 50.00 &pm; 0.01mm. - Magnet design, non-slip and easy to fix.

Instructions: 1. Before using, press the cutter shaft a few times to check whether the slide is smooth. 2. Wipe the bottom of the tool setting tool with the clean and soft cotton cloth and the zero base surface. 3. Wipe the workbench or workpiece that needs to be determined to the distance of the tool tip. 4. Place the tool setting tool upside down on the workbench or flat surface, and press down gently to ensure that the zero setting base surface and the work table or plane are completely fitted. Press the ON/OFF/ZERO key to set the zero position. . 5. After the zero position is set, set the tool setting tool on the table or workpiece plane directly below the machine tool tip, move the tool tip slowly down, touch the surface of the tool axis, and continue to slowly adjust downward until the LCD The degree on the display is 0.00mm. At this time, the distance from the tip to the table or the plane of the workpiece is 50 mm + / 0.001 mm. Zero the Z axis on the device at this time, then move the Z axis of the device to a safe distance, take the tool to the tool, and then move the Z axis down to the previously set zero position. At this time, the tool tip reaches the workbench. Or the distance of the workpiece plane is 50 +/- 0.001 mm. According to the actual needs, adjust the distance from the tool tip to the work surface or the workpiece plane to complete the tool setting. Package Included:
1 x Z axis setter

More Details: