Iron Removal Filter For Borehole & Wellpoint Water With FRP 13x54, Automatic Backwash Head & Birm...

• Birm® is both an efficient and economical media for the removal of iron and manganese compounds from groundwater supplies
• Birm® is easily cleaned by backwashing to remove the filtered compounds and does not require regeneration
• Requires a pH of 6.8 to 9.0 to be effective
• Can be used in either gravity fed or pressurized water treatment systems
• NSF Certified for assurance of food-grade quality

Iron Removal Filter For Borehole & Wellpoint Water With FRP 13x54, Automatic Backwash Head & Birm Media, NSF Certified, Up To 1500 Litres Per Hour for effective iron & manganese filtration.

FRP vessels are specifically designed to deliver high flow rates and can be combined with any number of specialized filtration media & chemicals for water purification systems ranging from medical applications to residential borehole systems. 

 *If you're looking for borehole water treatment advice, please CONTACT US  & one of our water technicians will get in touch

NSF Certification

The NSF mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today. It is valued by consumers, manufacturers, retailers & regulatory agencies worldwide.

What you get:

• FRP Vessel 13x54: x 1
• RUNXIN F56A1 Automatic Backwash Head: x 1
• Birm® Iron Removal Media 18kg: x 3

Conditions for operation:

• Alkalinity should be greater than two times the combined sulfate and chloride concentration
• Maximum water temp: 100o F/38oC
• Water pH range: 6.8-9.0
• Dissolved Oxygen (D.O.) content must be equal to at least 15% of the iron (or iron and manganese) content
• Bed depth: 30-36 inches
• Freeboard: 50% of bed depth (min.)
• Backwash rate: 10-12 gpm/sq. ft.
• Backwash Bed Expansion: 20-40% of bed depth (min.)
• Service flow rate: 3.5-5 gpm/sq. ft. intermittent flow rates and/or favorable local conditions may allow higher flow rates

Technical specs:

• Opening size: Top 2.5 inch
• Recommended flow rate: 2.02.5
• Vessel volume: 103.6L
• Operating pressure is 100 PSI(PE)/ 150 PSI(ABS)
• Operating temperature is 50(PE)/ 80(ABS)
• Tank dimensions (l x b x h): 140 x 139 x 33cm
• Vessel weight: 9.9kg