Kindly take note of the support or limitations notice of Windows 10 operating system installed on some devices: https://support.microsoft.com/en-gb/windows/windows-10-support-has-ended-on-october-14-2025-2ca8b313-1946-43d3-b55c-2b95b107f281
The J5Create Video Capture USB Hub is a dual-purpose device that combines an HDMI capture card with a USB-C hub. With the 1080p video capture and 4K USB-C display, as well as Power Delivery 3.0, you can stream in UHD without interruptions while charging your connected device. It also includes two SuperSpeed USB 5Gbps ports for further peripheral connectivity. The compact and lightweight design makes this video capture hub perfect for mobile streaming. When not used for streaming, it acts as a standard USB-C hub, allowing you to add two additional USB peripherals and a 4K HDMI display. It also supports upstream charging to keep your laptop powered while in use.
Features
UVC Capture
- HDMI to USB-C with 60W Power Delivery
- Power Delivery 3.0 lets you stream live without interruption
- Ultra-low latency stream through USB-C 3.2 connection
- 3.5 mm audio jack allows you to connect headphones or speakers
- 2 x SuperSpeed USB 5Gbps ports to connect additional peripherals
- UVC standard - No driver installation required
- Field production made easy with its compact size
USB-C Hub with 4K HDMI
- Easily add an HDMI video output with resolutions up to 4K @ 30 Hz
- USB-C Power Delivery provides up to 60W pass-through charging to the connected devices
- 2 x USB Type-A ports provide up to 5Gbps transfer speed
- 3.5 mm audio jack allows you to connect headphones or speakers
- No driver installation required for Windows, macOS or Android
Technical Specifications
- Host Connector: 1 x USB-C 3.2 (Female)
- Video Input: 1 x HDMI (Female)
- Video Output: 1 x HDMI (Female)
- Audio Input: Via USB port (USB Microphone required)
- Audio Output: 1 x 3.5mm AUX
- Video or Audio Switcher: No
- Power Source: Bus-powered or self-powered (USB-C PD power)
- Ports:
1 x USB-C PD 3.0
1 x HDMI Input
1 x 4K HDMI Output
1 x 3.5 mm audio jack
2 x USB Type-A (5Gbps)
Supported Resolutions: HDMI In: 3840 x 2160; USB-C display: 3840 x 2160; Capture/Record: 1920 x 1080
Maximum Display Refresh Rate: 30 Hz
Audio Channel: 2.1 via HDMI
Audio Frequency: 48 kHz
Microphone: N/A
Headset: 2.1 Stereo
Compression: USB 2.0: MJPEG
Encode Format: MJPEG
HDR Supported: No
Power Delivery: Up to 60W via USB-C
Input Current / Voltage: 3A / 20V
Output Current / Voltage: 3A / 20V
Cable Length: 30cm
System Requirements
For UVC Capture - Recommended software: OBS / CameraFi Live
- Available USB-C port that supports USB Power Delivery 2.0 or 3.0
- Windows 10 / 11
- macOS X 10.10 or later with UVC support
- Chrome OS with UVC support
- Android 7 and higher
For USB-C Hub
- Available USB-C port that supports DisplayPort alt mode and USB Power Delivery 2.0 (USB 3.2 is recommended). Please refer to the manufacturer of your hardware for more information on your device.
- DisplayPort v1.2 required on graphics card or video source to support 4K @ 30 Hz resolution
For USB-C Game Consoles
- When using your game console, we recommend using a charger higher than 30W PD USB-C to charge your console.
Notes
- The J5Create Video Capture USB Hub can connect to a USB-C port that does not support Power Delivery, but it will not pass power through the connected device.
- The HDMI Input port is for capture only. Additional displays will not output from this port. An external display can be connected through the HDMI Output port instead.
- For UVC capture, the 3.5 mm audio jack only works if the host connected to the monitor has built-in speakers.
What's in the box
1x J5Create Video Capture USB Hub
1x Quick Installation Guide
