Jax Oleum gloss varnish 1l

Jax Varnishes Per 1 Litre Bottle

 

The glose vanish water-based varnish is good for protecting an already oiled surface, it will add durability and increase the water resistance of the surface it is applied to. It is especially good for bar counters, restaurant tabletops, engineered flooring exposed to large volumes of traffic, etc.
It is a 2-part varnish 900ml of base and 100ml harder that must only be mix when your surface is fully prepared and ready to be sealed as it does start to harden once mixed.
An oiled surface should be left to dry for at least 24 hours before the varnish is applied.
Once mixed apply onto a dry, dust-free surface using a short mohair roller, or a cloth. Leave to dry for a few hours & lightly sand with a 240grit sandpaper or a maroon buffing pad. Clean the surface before the 2nd coat. A 3rd coat can be applied for heavy wear areas.
Allow drying for 24 hours before using the item/walking on the surface that has been varnished.
Covers up to 10m2 doing 2 coats.