JKM JK0220 Two Phase Hybrid Stepper Motor Driver DC12V-36V 0.3A-2.0A For CNC Robots
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615185578
Description:
JKM JK0220 Two Phase Hybrid Stepper Motor Driver ?DC12V-36V 0.3A-2.0A For CNC Robots
Specification:
Feature:
Average current control, two phase sinusoidal current output.
Photoelectric isolation signal input and output.
With overvoltage -, undervoltage -, over-current -, ?interphase short circuit protection function.
Eight channels subdivison and automatic idle-current reduction.
Eight channels output phase current setting.
Can drive 2 phase and 4 phase hybrid stepper motor when phase current less than 2.0A. 20KHz PMW
Usage:
Widely used in different kinds of CNC machine, robots and money-counting manchines.
Note: When ambient temperature is high or working current over 1.05A, fix the module on big metal shell, or use axle flows fan dispels the heat, to manke the module run reliably for a long time. Half current automatically: if control machine not send out signal in half second, driver enter ?half current state of automatically for electricity saving, the phase current of the winding of the eletric.
Package Included:
1 x?Stepper Motor Driver?
More Details:
, 
, 
, 
, 
, 
, 
, 
, 
, 
JKM JK0220 Two Phase Hybrid Stepper Motor Driver ?DC12V-36V 0.3A-2.0A For CNC Robots
Specification:
| Type | JK0220 |
| DC Input ?Voltage | 12V-36V |
| AC Input ?Voltage | 12-24V? |
| Output Current? | 0.3A - 2.0A |
| Operating Temperature | -10?ﾣ - ?45?ﾣ |
| Storage Temperature | -20?ﾣ - ?125?ﾣ |
| Weight | 180g |
| Humidity | No condensation, no water droplets |
| Gas | Prohibition of combustible gasses and conductive dust |
Feature:
Average current control, two phase sinusoidal current output.
Photoelectric isolation signal input and output.
With overvoltage -, undervoltage -, over-current -, ?interphase short circuit protection function.
Eight channels subdivison and automatic idle-current reduction.
Eight channels output phase current setting.
Can drive 2 phase and 4 phase hybrid stepper motor when phase current less than 2.0A. 20KHz PMW
Usage:
Widely used in different kinds of CNC machine, robots and money-counting manchines.
Note: When ambient temperature is high or working current over 1.05A, fix the module on big metal shell, or use axle flows fan dispels the heat, to manke the module run reliably for a long time. Half current automatically: if control machine not send out signal in half second, driver enter ?half current state of automatically for electricity saving, the phase current of the winding of the eletric.
Package Included:
1 x?Stepper Motor Driver?
More Details:
, , , , , , , , ,