This item has closed with no items sold
View other items offered by techietoys72
JUNSUNMAY SAS 22 Pin to 7 Pin + 15 Pin SATA Hard Disk Drive Raid Adapter
New
R276.00
Closed
6 May 24 02:33
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
SYA0022030
Bob Shop ID
613306913
1. Please note: IF the SAS hard disk is to be used on an ordinary SATA motherboard the hard disk must have the SATA logo. Please pay attention to the description in the 7th and 8th pictures. SAS 22 Pin to 7 Pin + 15 Pin SATA Hard Disk Drive Raid Adapter with 15 Pin Power Port
2. Explanation about SAS: Please pay attention! The motherboard must support SAS, (you can use SATA cable), but you must connect to the SAS interface, then you can't recognize the hard disk on the SATA! No SAS connector on the motherboard does not support this connector! Must be a SAS interface! ! The purpose of the product is to connect the SAS hard disk to the motherboard with SATA through the adapter. Can not be used in reverse, please be aware!
3. This SAS adapter to 1x SATA 22pin, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller
4. 7 Pin SATA Connector to 15 Pin Male Power Connector and SAS Connector.
5. Connector Details: 1 x 7 Pin Serial ATA Male. 1 x 15Pin Male.Connector Details: 1 x 22 Pin SAS.
2. Explanation about SAS: Please pay attention! The motherboard must support SAS, (you can use SATA cable), but you must connect to the SAS interface, then you can't recognize the hard disk on the SATA! No SAS connector on the motherboard does not support this connector! Must be a SAS interface! ! The purpose of the product is to connect the SAS hard disk to the motherboard with SATA through the adapter. Can not be used in reverse, please be aware!
3. This SAS adapter to 1x SATA 22pin, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller
4. 7 Pin SATA Connector to 15 Pin Male Power Connector and SAS Connector.
5. Connector Details: 1 x 7 Pin Serial ATA Male. 1 x 15Pin Male.Connector Details: 1 x 22 Pin SAS.