Multi-function lighting JX-118 + solar panel + motion sensor !
SMD COB LED 2020 LEDs, NEW!
Installation without wires!
Charging from the sun!
Motion Sensor!
Fastens on any surface!
A solar-powered LED floodlight with a motion sensor is a powerful street lamp for outdoor lighting of the territory without the need for an electrical connection. The built-in battery is charged by solar energy, which is enough for full lighting throughout the night. The lamp is easily installed on any vertical surface of walls, fences, gates. The LED lamp with a motion sensor allows you to save electricity without additional installation costs. Just attach the lamp in the right place.
Light scattering angle - 120
Number of LEDs - 1 pc. SMD COB
Type Solar-powered luminaires
Degree of protection - IP 65
Installation - Outdoor
- Solar Panel: 0.5w, 5.5V
- Li-ion Battery: 1200mAH, 3.7V
- LED Power: 0.2w, 5000K-5500K,
- Motion Angle and Distance: 120 °, 3m
- High Light Delay: 10 seconds
- Switch: OFF and AUTO
- Lighting Mode: OFF and high Light
- Size: 124 * 96 * 48mm
A luminaire with a sensor does not require, for its operation, any wires and sources of electricity, it can be installed absolutely anywhere where it is needed, to illuminate the local area (on the wall of the house), on the balcony, between stairwells, garages, garden paths over the front door, etc.
The lamp is mounted on any surface, and contains a built-in sensor motion sensor, which operates at a distance of 3-5 meters and turns on the lamp for 25 seconds. (when triggered, it can scare away thieves and stray animals) and a light sensor that responds to day-night.
The lamp is equipped with an energy-consuming Li-on battery, 3.7 V, 1200 mAh for storing energy received from the solar panel. A battery charged from the sun is enough for 500 starts, and daylight hours are enough to recharge the battery. The self-contained lamp with a motion sensor and a light sensor has 1 very bright SMD COB LED.
The lamp has a stylish triangular shape. One of the corners of the lamp on which 1 LED and the PIR motion sensor are located has an angle of 120 degrees. On the opposite side is a solar panel. The range of the motion sensor is 3-5 meters. This is enough to turn on the lights when a person approaches the yard, but not turn on people passing by. The viewing angle of the sensor is 120 degrees. The lamp has 1 operating mode, in which it lights up in the dark, only when movement is detected at a distance of 3 to 5 meters. After detecting movement, the lamp burns for about 25 seconds, in the absence of movement, the lamp goes out.
The degree of protection IP65 allows the use of a lamp on the street, excluding the effects of atmospheric weather events and precipitation at temperatures from -20 to +55 degrees.
Specifications:
Solar panel: 0.55 watts;
Battery: 1 lithium-ion battery, 1200 mAh;
Number of LEDs: 1;
Type of diode: SMD COB;
Sensor Angle: 120 degrees;
Range of motion sensor: 5 m;
Degree of protection: IP65 (Street);
Delay: about 25 s;
Light sensor: <10 Lux;
Case Material: ABS
