POSITION YOUR ACCESSORIES EXACTLY WHERE YOU NEED THEMThe K&F Concept KF31.098 Magic Arm Mini with Arri Pin is designed for hybridshooters and content creators who need to reposition monitors, lights, ormicrophones quickly between setups without dealing with multiple lock points.Mount the cold shoe base directly onto your camera, cage, or top handle, thenattach your accessory to the 1/4-inch threaded mounting point at the oppositeend. The dual ball-head design allows independent adjustment at both ends,making it easy to position the arm around a lens hood while separately anglingyour monitor, light, or microphone exactly where you need it. A single thumblever locks both joints simultaneously for faster mid-shoot adjustments, whilethe Arri positioning pins help prevent unwanted rotation during handheld use.Weighing just 105g and measuring 12.2cm long, it stays compact enough fordaypack carry while supporting loads up to 1.5kg, suitable for most compact LEDpanels, field monitors, and shotgun microphones used in run-and-gun setups.Dual ball head for multi-axis positioningThe dual ball-head design gives you full 360° rotation at both ends of the arm,unlike single-pivot arms that only tilt forward and back. This matters whenyou're mounting a monitor on a cage for waist-level shooting on a gimbal, thenneed to reframe at eye level for tripod work without remounting anything. Eachball joint rotates independently, so you can angle the arm to clear yourcamera's geometry, then separately adjust the accessory to face your subject.The single thumb lever locks both joints simultaneously, faster than armsrequiring separate adjustments at each end, which matters when you're workingalone and need to reframe quickly between takes.Arri pins prevent rotation under loadThe 1/4-inch positioning screw includes retractable Arri-style locating pinsthat seat into matching holes on camera cages and top handles. Once seated, thepins prevent the arm from rotating loose during handheld work, the most commoncomplaint about budget arms that rely on friction alone. Mount a fill light on acage for an interview and trust it stays aimed at your subject through multipletakes, rather than drifting out of position every time you adjust the cameraangle. The pins are retractable, so the arm still functions as a standard1/4-inch screw mount on devices without Arri holes, they simply addanti-rotation security when your cage does have them.Cold shoe and threaded mounts on both endsOne end features a universal cold shoe mount designed to slide directly onto acamera, cage, top handle, or any standard cold shoe receiver. The cold shoe basealso includes an integrated 1/4-inch threaded hole, allowing the arm itself tobe mounted to threaded rigging points when needed for alternative setups. Theopposite end uses a 1/4-inch positioning screw for attaching accessories such asLED panels, microphones, field monitors, or other equipment with a standard1/4-inch threaded mounting point. This combination provides flexible mountingoptions across camera cages, gimbals, tripods, and handheld rigs withoutrequiring additional adapters or secondary support arms.1.5kg load capacity for typical run-and-gun accessoriesThe arm supports a combined load of 1.5kg across both ends without sagging orslipping, comfortable territory for a compact LED panel, 5-inch monitor, orshotgun mic. This covers typical vlogging rigs where you're running a shotgunmic on the cold shoe and mounting the arm itself to a camera cage, or attachinga small fill light for indoor interviews. The load capacity excludes heavybattery-powered LED fixtures or large external recorders, but those accessoriestypically require heavier cinema arms anyway. For hybrid shooters working withmirrorless cameras and compact accessories, 1.5kg is the practical workingrange.O-ring damping for controlled adjustmentsThe rotating ball bodies use O-ring damping to add controlled resistance duringadjustment, so the arm doesn't flop to a new angle the moment you loosen thelock. This gives you fine control when positioning a monitor or light, insteadof overshooting and having to readjust three times. The damping holds positioneven when the thumb lever is slightly loose, so you don't need to crank it downhard enough to risk stripping threads. If you're dialling in the exact angle fora fill light on a product shoot, the O-ring damping makes the adjustment feelsmooth rather than loose or sticky. Two replacement O-Rings are included withthis item.105g aluminium alloy for compact rigsAt 105g, the arm adds a monitor or mic to your setup without the weight penaltythat forces you to leave accessories at home. The aluminium-alloy constructionkeeps the arm light enough to mount on a gimbal or compact rig without greatlythrowing off balance, critical for travel vlogging setups that need to fit in adaypack and still include a shotgun mic and small LED. Fold it into a Z to getitems as low as 5 cm or stretch it all out vertically and get as high as 12 cmfrom the same flexible body. The compact dimensions mean the arm actuallytravels with you instead of being left at home because it's too bulky to pack.The K&F Concept Magic Arm Mini with Arri Pin 1/4" and Cold Shoe Heads is apractical upgrade for hybrid shooters who need to reposition monitors, lights,or microphones quickly between setups without the rotation drift that plaguescheaper arms. With dual ball-head articulation, Arri pin anti-rotation, and asingle-lever lock, it's a reliable tool designed to support modern run-and-gunworkflows. Order the KF31.098 today and take control of your accessorypositioning with confidence.FREQUENTLY ASKED QUESTIONSFrequently Asked Questions:Q: Will this arm work with my existing camera cage if it doesn't have Arri pinholes?A: Yes. The Arri pins are retractable, so the arm functions as a standard1/4-inch screw mount on any cage or device with a 1/4-inch threaded receiver.The pins simply add anti-rotation security when your cage does have the matchingholes, they don't prevent compatibility when it doesn't.Technical Specifications: - Maximum Load Capacity: 1.5kg - Material: Aluminium alloy - Weight: 105g - Arm Length: 12.2cm - Dimensions: 12.2cm x 4.8cm x 2.4cm - Ball Head Design: Dual ball head with 360° rotation - Mounting Interfaces: Cold shoe mount with 1/4" screw hole (one end), 1/4"positioning screw with retractable Arri pins (other end) - Locking Mechanism: Single thumb lever locks both ball joints simultaneously - Damping System: O-ring damping on rotating ball body
