KOWAL 1mm Oversize Actuator for Sanwa JLF Series Joystick (Arcade)(New) - KOWAL 50G
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Free collection from
Foreshore, Cape Town
The seller allows collection for this item and will be in contact with the full collection address once the order is ready.
Ready for collection by Tuesday, 28 May.
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 2 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
South Africa
Product code
9234-1000322517946
Bob Shop ID
613098302
| Introduction: The KOWAL 1mm oversize actuator is a simple, economical, and non-invasive performance modification for Sanwa JLF joysticks. It replaces the original Sanwa JLF-Series actuator, offering a shorter throw (-1mm), plus faster engage and diagonal (+1.5mm), while retaining the original neutral zone - a critical area that allows the joystick to properly return to center and set up the next direction. Moves such as Mortal Kombat 9's "Instant Air Gas Blast" for Kabal, or Guilty Gear's X's "In Air Dash" are greatly improved. Other moves such as jump cancel specials (canceling the pre-jump frames of a super jump into a special attack, common with UMVC3) are easier to perform. |
| Features: The KOWAL 1mm oversize actuator is compatible with all the Sanwa JLF series of joysticks. KOWAL actuator retains the neutral zone. This allows switches to perform normally. Actuators, Zones, Throws, and Engage Distance Explained: Neutral Zone is area in which the actuator does not touch the switches. Dead Zone is the area that the actuator begins pressing the switch. Activation Zone is the area where the switch is pressing down. Throw is the maximum distance/angle the shaft can be moved in a particular direction. Longer throw means that it takes longer to return to neutral for the next move. Engage Distance is the distance or angle between neutral and the engagement of a given switch or set of switches. It's important to remember that Dead Zone and Neutral Zone are not the same. Actuators cannot use the neutral zone for faster engage because the switch must have this area in order to function properly. The KOWAL actuator factors in the neutral zone so that it doesn't block the switches' own plungers. This allows the switches to function normally, enabling the actuator to correctly bounce back to the center upon release, ready for the next directional move. Size Matters: There are other oversize actuators on the market. However, many of them do not properly factor in the Neutral Zone. Instead, they simply enlarge the entire actuator, cutting off the Neutral Zone and affecting the proper activation of the switches. This messes up the Activation Zone as well, and works against the intended goal of speeding up engage and shortening throw. If you see 1.5mm actuators or larger, keep this in mind -- anything larger than 1mm starts to mess up the proper function of the standard 200gf (operating force) JLF switches. Anything less than 1mm won't shorten engage distance effectively. Compatibility, Design and Origin of the KOWAL Actuator: The KOWAL 1mm actuator is tested on both square and octagonal gates and best used with the stock Omron 200gf switches that come with the Sanwa JLF. It is designed in a lightweight nylon material, and its non-tapered shape allows the actuator to engage switches consistently. Kowal is the name of a well-respected member on Shoryuken.com forums and elsewhere in the arcade community. He has extensive knowledge of the inner workings of many control devices. Kowal originally introduced the oversized actuator as a performance enhancement for SHMUPs (horizontal or vertical space shooters like Gradius, DoDonPachi, etc.) but was later found to work great with many fighting game titles. |
| Specifications: Platform: Arcade Machine Release Date: 2015 Genre: Actuators |