LED 7-15W Thyristor Dimming Driving Power Supply Module for Ceiling Lamp Panel Light Downlight

Features:
1. Non-isolated output, high-power LED dimming driver, please pay attention to the safety of use, and the housing is electrically insulated. 2. The F7-15X1W driver is designed for dimming 7-15 1W high-power LED lamps, and the lamp beads must be connected in series. 3.Open circuit protection:no-load power consumption 1.2/0.3W (long-term open circuit output is not recommended to avoid damage to the protection components) 4.High temperature protection:if the temperature of the power supply exceeds 150ﾣC, the output will be turned off, and the output will be restored when the temperature drops to 90ﾣC.
Technical Parameters:
Product model: F7-15W non-isolated dimming driver Input voltage: 85~265V/AC Inputfrequency: 50/60Hz Input current: 0.12A or 0.23A Inrush current: 2A (500nS) Power factor: 0.6 Power efficiency: 88% Output voltage: 20~49V Output current: 200-280/150-280mA Ambient temperature: -20a~ +45a Environmental humidity: 20~ 50% RH Bare board size: 51 x 21 x 18 MM Weight: 50 g Input wiring: external_brown (live wire L), blue (zero wire N); built-in_white (live wire L); white (zero wire N) Output wiring: external_red (positive +), black (negative-); built-in_red (positive +), white (negative-)
Quality Assurance: This thyristor dimming light comes from the date of manufacture, not due to water, dampness or short circuit of the shell, etc., one year replacement, two years warranty.
NOTE: For built-in use, it is forbidden to use heat-shrinkable tubing for insulation, it must be wrapped with insulating paper, and vents must be left at the input and output ends to facilitate heat dissipation of the power supply. Note for use: This power supply is non-isolated, please connect the lamp and then power on, otherwise it will burn the lamp source! ! !
Package included:
1 x Dimming Driving Power Supply Module