LED WS2812B 5050 Programable Board RGB (White on White)

This is a breakout board for the WS2812B RGB LED. The WS2812B is actually an RGB LED with a WS2811 built right into the LED! Several of these breakouts can even be chained together to form a display or an addressable string. This little PCBs are only 8mm x 10mm and have two sets of three pads on the back for soldering wires. This pixel have full 24-bit color ability with PWM taken care of by the controller chip. Since the LED is so bright, you need less current/power to get the effects you want. The driver is constant current so its OK if your battery power changes or fluctuates a little.

Each 5050 form-factor LED is mounted on a single round PCB matching the LED's trim color (black or white). Since they are tightly designed, there are no mounting holes to sew or screw to. They have to be glued or mechanically mounted to your project.

Features:
WS2812B 5050 addressable LED
9.6mm diameter PCB
2.8mm overall height
Solder points on backside of PCB
Includes bypass capacitor and input resistor
Viewing angle: 120 degrees
Red: (620-630nm) @ 550-700mcd
Green: (515-530nm) @ 1100-1400mcd
Blue: (465-475nm) @ 200-400mcd

Forward Voltage:
Red: 1.8-2.2V
Green: 3.0-3.2V
Blue: 3.2-3.4V