LiquiMoly - Engine Flush Plus

Engine Flush Plus is a highly effective cleaning fluid for clearing the engine interior of troublesome deposits. In combination with the carrier fluid, the ideally formulated c ombination of detergent and dispersant additives dissolves sludge and lacquer formers quickly and reliably. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics. Wear in the engine is thus reduced and the service life is extended.

Properties:

• Gentle and rapid cleaning
• Neutral to seals and other materials installed in the engine
• Optimal engine performance
• Significant reduction in wear
• Tested with diesel particulate filters (DPF), catalytic converters and turbochargers
• Highly economical
• No additional environmental pollution
• Simple to use.

  Areas Of Application:

  For cleaning and flushing out the oil circuits of gasoline and diesel engines.

  Use:

  One 300 ml can is sufficient for up to 6 liters of oil. Add Engine Flush Plus to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush Plus is compatible with all commercially available motor oils. We recommend cleaning the engine interior with Engine Flush Plus before every oil change.

  Disclaimer: Not suitable for use on motorbikes with wet clutches.

  What's in the box
  1x Liqui Moly Engine Flush Plus 300ml